Since you're doing 802.3at, any chance of adding IEEE 1588 support for standardized timing over ethernet? There are a number of switch/router platforms designed for small cell environments that do both and we could greatly simplify our tower builds if we could use them.
E.g. slap a Juniper ACX500-O-PoE on a pole, cable in the backhaul and AP, and you're done. No more cabinet, no more poe/sync injector, stand-alone switch, etc. On Wed, Jul 15, 2015 at 4:27 PM, Matt Mangriotis < [email protected]> wrote: > Good questions. > > > > Both CMM4 and UGPS are supported with 450i. True, the 6-pin port became a > RJ-45 port, so the pinout is different. > > > > For connecting the CMM4, because the 450i is now powered by 802.3at PoE, > you’ll need the 56 VDC power supply and the cable from the CMM4 to the PMP > 450i AP has a different pinout. > > > > These cable pinouts will be documented in the user guides. > > > > PMP 450d is a SM only, so sync is taken from the AP. > > > > Matt > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Brian Sullivan > *Sent:* Wednesday, July 15, 2015 3:47 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] 450d vs. 450i > > > > It has an AUX port that is Rj-45. No more Rj-11. > > On 7/15/2015 3:45 PM, Pavel Lyuty wrote: > > Sync only via CMM ? > > > > UGPS and other timing-port sync not supported ? > > > > > > > > 2015-07-15 17:55 GMT+03:00 Matt Mangriotis < > [email protected]>: > > These are two different products, addressing different markets. Cambium > is hard at work getting new products released at an increased rate, all > with the goal of providing solutions to help you guys build your businesses… > > > > Check out the Press Release and additional information on the 450i, which > was just released this morning: > > > > http://www.cambiumnetworks.com/pressreleases > > > > Feel free to ask questions about it here, or on our forum site also: > > > > > http://community.cambiumnetworks.com/t5/PMP-450/Introducing-Cambium-450i-PMP-and-PTP/m-p/42199#U42199 > > > > Matt > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Mike Hammett > *Sent:* Wednesday, July 15, 2015 8:33 AM > *To:* Animal Farm <[email protected]> > *Subject:* [AFMUG] 450d vs. 450i > > > > Am I correct in that these two products were developed independently of > each others' advancements? the 450d is just a regular 450 feature set in a > dish form factor and the 450i is all of the new capabilities, but in the > traditional form factors? > > > > > > > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > > Midwest Internet Exchange > http://www.midwest-ix.com > > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > > > > >
