I feel sorry for Forrest.... From: Matt Mangriotis Sent: Wednesday, July 15, 2015 4:21 PM To: [email protected] Subject: Re: [AFMUG] 450d vs. 450i
Maybe I am being less than clear, so apologies for that. There are two RJ-45 ports on this product: 1 port is Data/Power (i.e. the main port) 1 port is AUX, which has (or will have) many functions, among them is input/output of the sync pulse (i.e. UGPS) In summary, the radio supports “sync over power” via the CMM4 (using a custom cable pinout) and 56 VDC. It also supports “sync over timing port” via the UGPS (or other devices that perform similar functions) using the AUX port (and custom cable). Does this make sense? Matt From: Af [mailto:[email protected]] On Behalf Of SmarterBroadband Sent: Wednesday, July 15, 2015 4:51 PM To: [email protected] Subject: Re: [AFMUG] 450d vs. 450i Timing on the power port? From: Af [mailto:[email protected]] On Behalf Of Matt Mangriotis Sent: Wednesday, July 15, 2015 2:27 PM To: [email protected] Subject: Re: [AFMUG] 450d vs. 450i Good questions. Both CMM4 and UGPS are supported with 450i. True, the 6-pin port became a RJ-45 port, so the pinout is different. For connecting the CMM4, because the 450i is now powered by 802.3at PoE, you’ll need the 56 VDC power supply and the cable from the CMM4 to the PMP 450i AP has a different pinout. These cable pinouts will be documented in the user guides. PMP 450d is a SM only, so sync is taken from the AP. Matt From: Af [mailto:[email protected]] On Behalf Of Brian Sullivan Sent: Wednesday, July 15, 2015 3:47 PM To: [email protected] Subject: Re: [AFMUG] 450d vs. 450i It has an AUX port that is Rj-45. No more Rj-11. On 7/15/2015 3:45 PM, Pavel Lyuty wrote: Sync only via CMM ? UGPS and other timing-port sync not supported ? 2015-07-15 17:55 GMT+03:00 Matt Mangriotis <[email protected]>: These are two different products, addressing different markets. Cambium is hard at work getting new products released at an increased rate, all with the goal of providing solutions to help you guys build your businesses… Check out the Press Release and additional information on the 450i, which was just released this morning: http://www.cambiumnetworks.com/pressreleases Feel free to ask questions about it here, or on our forum site also: http://community.cambiumnetworks.com/t5/PMP-450/Introducing-Cambium-450i-PMP-and-PTP/m-p/42199#U42199 Matt From: Af [mailto:[email protected]] On Behalf Of Mike Hammett Sent: Wednesday, July 15, 2015 8:33 AM To: Animal Farm <[email protected]> Subject: [AFMUG] 450d vs. 450i Am I correct in that these two products were developed independently of each others' advancements? the 450d is just a regular 450 feature set in a dish form factor and the 450i is all of the new capabilities, but in the traditional form factors? ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com
