Yes, bridge works fine.
On 7/16/2015 2:08 PM, Eric Muehleisen wrote:
Is it safe to say that upgrading a P8 SM remotely to 13.4 is ok as
long as you are not using NAT?
On Thu, Jul 16, 2015 at 1:39 PM, Mark Radabaugh <[email protected]
<mailto:[email protected]>> wrote:
Chitrang - where do you want the bricks?
Just for you we pulled the engineering.cgi from a 12.2 and a
13.1.3 P8 FSK radio and then bricked them both with 13.4 and gave
the customers new radios.
Where do you want the dead radios and the dump files sent?
You can keep the P8’s and add them to your regression testing lab.
Mark
> On Jul 14, 2015, at 10:08 PM, Chitrang Srivastava
<[email protected]
<mailto:[email protected]>> wrote:
>
> Hi Bill,
>
> In order to investigate P8 issue, please do following,
>
> AFTER upgrade to P8 and applying configuration changes but
BEFORE doing reboot, take out engineering.cgi.
> Please also send configuration file as well from Configuration -
> Unit Setting.
>
> Does without NAT P8 is accessible?
> If the above steps didn't work ( actually they should because
most of our configuration changes applies on next reboot) they
please send screen shot of NAT configuration page before you press
Save Changes.
>
> Thanks,
> Chitrang Srivastava
> Cambium Networks
>
> ________________________________________
> From: Af <[email protected] <mailto:[email protected]>> on
behalf of Bill Prince <[email protected]
<mailto:[email protected]>>
> Sent: 15 July 2015 05:35:23
> To: [email protected] <mailto:[email protected]>
> Subject: Re: [AFMUG] Software 13.4: P8 FSK not recommended
>
> Nope. Have already loaded 13.4 on P9, P10, and P11, and all is
good with
> them.
>
> Have also loaded 13.4 on PMP430 and PMP450.
>
> bp
> <part15sbs{at}gmail{dot}com>
>
> On 7/14/2015 4:59 PM, George Skorup wrote:
>> I wonder if this affects P9 boards as well? That would suck.
Not sure
>> if I have one around the office to test.
>
>
