I'm not doing any MT Queuing, the Only Queue is the EPMP QOS. I put a
MT in Bridge mode at one of the customer locations for bandwidth testing
after the customer was complaining about slow speeds. The MT BW Test to
that Bridge runs as expected. It's reassuring that others are not
seeing this.
On 7/22/2015 5:43 AM, Ken Hohhof wrote:
Also, the two tests may be different. Speedtest.net type test may be
saying I see packet loss starting at X Mbps so the rate is X, while
iPerf type test may say I see Y Mbps goodput despite some packet loss
so the rate is Y.
This may be interacting with the queuing method, as Mike points out.
Perhaps set the ePMP to wide open and see if customer results change,
then set queue in Miktrotik and see what happens.
*From:* Mike Hammett <mailto:[email protected]>
*Sent:* Wednesday, July 22, 2015 5:30 AM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Epmp user throughput
I read it as using the ePMP for queuing, the performance is less than
expected. Using the MT for queuing, the performance is as expected.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
<https://www.facebook.com/ICSIL><https://plus.google.com/+IntelligentComputingSolutionsDeKalb><https://www.linkedin.com/company/intelligent-computing-solutions><https://twitter.com/ICSIL>
Midwest Internet Exchange
http://www.midwest-ix.com
<https://www.facebook.com/mdwestix><https://www.linkedin.com/company/midwest-internet-exchange><https://twitter.com/mdwestix>
------------------------------------------------------------------------
*From: *"Josh Luthman" <[email protected]>
*To: *[email protected]
*Sent: *Tuesday, July 21, 2015 10:57:18 PM
*Subject: *Re: [AFMUG] Epmp user throughput
If the Mikrotiks at the customer site are doing 40x10 but the customer
devices behind the MT it doesn't really make sense to look at the epmp
for your problem.
It could be the Mikrotik's CPU, port, wireless or the customer device.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Jul 21, 2015 at 11:54 PM, Nate Burke <[email protected]
<mailto:[email protected]>> wrote:
I have deployed quite a bit of epmp, but most people are at my
base package, 4x1 (using the radio qos to limit bw on different
tiers). Of the handful of people that are on larger plans, 20x5 or
40x10, 2 of them, on different towers are complaining that they
struggle to get over 10mb on a speed test. The radio rf link test
performs at the assigned qos level, and I sent one of them a
mikrotik to go between the poe and his router (qos 40x10), and
udp/tcp tests to that are coming back as expected. However, I can
be watching the router, and his interface plugged directly into a
laptop only runs like 10x2 during a speedtest. Do both of these
customers have something wonky with their laptops, or is there a
setting in epmp I'm overlooking? Most of our epmp deployment has
been FSK upgrades, so I haven't had much actual laptop time myself
behind an epmp sm, as we just go on the roof and change radios.
Nate
