Re: [AFMUG] ePMP + Radius

Thu, 23 Jul 2015 22:44:33 -0700

I want all of it to be in sync. ePMP, 100, 450. Doesn't matter if it's on the same tower or not. We have lots of 450 at core sites and 100 at remote sites. Some of the remote sites are pretty close to the core, like 1-2 miles (so we don't have to put up 900 to get some customers with some trees in the way). I would rather retire the 100 and use ePMP at the remotes instead. We've been deploying more 100 at fill-in sites the last few months because the ePMP is stuck on 5ms framing. Just sayin'. 

My $0.02.

On 7/23/2015 4:20 PM, Sakid Ahmed wrote:
As in your core, high density is 450, out skirts are non Cambium and you are looking for a cheaper solution to put in that will play nice with 450.
On Jul 23, 2015, at 4:16 PM, Josh Luthman <[email protected] <mailto:[email protected]>> wrote: 

How would 450/epmp co-location be relevant to non Cambium gear?
I would imagine if someone starts with ePMP and then gets to the point where they need a little extra punch and can afford 450, sync would be extremely helpful. 


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Jul 23, 2015 at 5:13 PM, Sakid Ahmed <[email protected] <mailto:[email protected]>> wrote: 

    There are some technical challenges around further frame start
    accuracy that would have to be worked through. PMP100 syncing
    does not automatically give 450/430 syncing and it does require
    some additional work.
    We are curious to understand the use case for 450/ePMP
    co-location? Is it on the network fringes? Is it to swap non
    cambium gear :)

    Sakid



    On Jul 23, 2015, at 3:07 PM, Mike Hammett <[email protected]
    <mailto:[email protected]>> wrote:

    Not being a PMP user, what's different with 430\450 that makes
    it not match this new framing? I thought 100 synced with
    430\450, therefore if ePMP matched 100, it would 430 and 450 as
    well.



    -----
    Mike Hammett
    Intelligent Computing Solutions
    http://www.ics-il.com <http://www.ics-il.com/>

    
<https://www.facebook.com/ICSIL><https://plus.google.com/+IntelligentComputingSolutionsDeKalb><https://www.linkedin.com/company/intelligent-computing-solutions><https://twitter.com/ICSIL>

    Midwest Internet Exchange
    http://www.midwest-ix.com <http://www.midwest-ix.com/>


    
<https://www.facebook.com/mdwestix><https://www.linkedin.com/company/midwest-internet-exchange><https://twitter.com/mdwestix>
    ------------------------------------------------------------------------
    *From:*"Sakid Ahmed" <[email protected]
    <mailto:[email protected]>>
    *To:*[email protected] <mailto:[email protected]>
    *Sent:*Thursday, July 23, 2015 3:02:14 PM
    *Subject:*Re: [AFMUG] ePMP + Radius

    Speaking of PMP100 co-location, we are seeking about 10 beta
    candidates who would be willing to co-locate ePMP 100 next to
    their PMP100. Following are some of the highlights -

    - Configure ePMP to 2.5 ms
    - Support 75/25 (the most tested configuration during beta)
    - Use CMM4 or onboard GPS with any combination on the PMP100
    (Haven’t verified 3rd party sync just yet)
    - 5 MHz guard band for vertical install or replacing a couple of
    PMP100 with an ePMP 1000 & 90 degree sector
    - Offline frame calculator and a guide will be available

    Please hit Dan or I offline if you are interested. As always,
    thanks in advance.

    Sakid

        On Jul 23, 2015, at 2:38 PM, Dan Sullivan
        <[email protected]
        <mailto:[email protected]>> wrote:

        Paul,
        2.5 will include:
        2.5 msec frame
        Collocation with Canopy FSK
        AP WiFi providing connectivity to ePMP SM WiFi, Ubiquiti SM
        WiFi, and Mikrotik SM WiFi; and outdoor WiFi hotspot
        ePTP DFS channel support
        uPNP
        Dan
        *From:*Af [mailto:[email protected]]*On Behalf Of*Paul McCall
        *Sent:*Wednesday, July 22, 2015 9:26 PM
        *To:*[email protected] <mailto:[email protected]>
        *Subject:*Re: [AFMUG] ePMP + Radius
        Is there a feature list of what’s coming in 2.5 ?
        *From:*Af [mailto:[email protected]]*On Behalf Of*Dan
        Sullivan
        *Sent:*Wednesday, July 22, 2015 4:57 PM
        *To:*[email protected] <mailto:[email protected]>
        *Subject:*Re: [AFMUG] ePMP + Radius
        Hi,
        Our next release is 2.5.0 and it is coming out next month.
        The release after this will contain VLAN VSAs and RADIUS
        Authentication for the SMs.

        Daniel Sullivan
        ePMP Software Manager
        Cambium Networks
        Cambium Networks Community Forum
        <http://community.cambiumnetworks.com/>
        *From:*Af [mailto:[email protected]]*On Behalf Of*Josh
        Luthman
        *Sent:*Wednesday, July 22, 2015 3:53 PM
        *To:*[email protected] <mailto:[email protected]>
        *Subject:*Re: [AFMUG] ePMP + Radius
        If you ask in the forum you get a pretty quick answer.  It's
        always a solid answer, too.
        I don't think anything with VLANs changed in 2.4.3 but I
        don't use them. Nor do I use Radius.

        Josh Luthman
        Office: 937-552-2340 <tel:937-552-2340>
        Direct: 937-552-2343 <tel:937-552-2343>
        1100 Wayne St
        Suite 1337
        Troy, OH 45373
        On Wed, Jul 22, 2015 at 4:50 PM, Gilbert T. Gutierrez, Jr.
        <[email protected]
        <mailto:[email protected]>> wrote:
        I saw that Cambium released software version 2.4.3 recently.
        I hoping they would allow the ability to assign VLANs with
        radius (does not look like they have). Does anyone know if
        Cambium ever plans on offering that functionality on the
        ePMP platform?

        Gilbert T. Gutierrez, Jr.

Reply via email to