It should. I have personally written dial pulse decode algorithms in past lives. They are not terribly difficult. If they can detect the off hook, a bit of code and they have the rest.
From: Bruce Robertson Sent: Wednesday, August 12, 2015 4:49 PM To: [email protected] Subject: Re: [AFMUG] voip inadequacies Every ATA I have tested works just fine with dial phones. If you're as geeky and as fleet of finger as I am, you can test this by toggling the switch-hook quickly. On 08/11/2015 04:08 PM, Chuck McCown wrote: I am compiling a list of sip/voip issues I have run into over the years. I am going to get beaten up by some bureaucrats tomorrow morning and I want to have a list to defuse them before the oral part of the proceedings start. I am going to say that ATA/SIP/VOIP is not suitable for the following: Fax Machines (don’t even get me started on this, tried to do a doctor’s office and pharmacy once....) TDD The teminal that deaf people use. Does anyone know if a TDD will work on a garden variety ATA? I don’t have one I can test with. Dial up modems.... Fire Alarm control panels (the monitoring companies refuse to even hook it up if you tell them it is VOIP). Burglar Alarms .... ditto I wonder about heart monitors that you wear and have the results phoned in. Dial phones. I have never tried to use a pulse dial phone on an ATA/SIP unit. I wonder if it would work. Any others? !DSPAM:2,55ca8069295195681978812!
