Is this for customer locations, or your own tower boxes? Do you use wire duct in your DIN rail boxes? That plastic stuff with fingers and a cover? We have some from Panduit with sticky tape on the back. If you have some the right size to grip the POE, maybe cut a short piece of that?
From: Josh Luthman Sent: Thursday, August 13, 2015 11:02 AM To: [email protected] Subject: Re: [AFMUG] Mounting ePMP poes That would be the POE that needs replaced every year for sure =P Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Aug 13, 2015 at 12:00 PM, Christopher Tyler <[email protected]> wrote: Glue a DIN rail mount to the back of the PoE maybe? Use some good strong glue, Elmers white probably won't cut it :) -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 ----- Original Message ----- From: "Andy Trimmell" <[email protected]> To: [email protected] Sent: Thursday, August 13, 2015 10:39:45 AM Subject: Re: [AFMUG] Mounting ePMP poes for toughswitch mounts I buy the Maxxwave wallmount from baltic. From: Af [mailto:[email protected]] On Behalf Of David Sent: Thursday, August 13, 2015 8:41 AM To: [email protected] Subject: Re: [AFMUG] Mounting ePMP poes Josh, Here is what we did using an enclosure and some velcro straps On 08/12/2015 08:55 PM, Josh Luthman wrote: NOTHING to work with :( Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 12, 2015 9:50 PM, "Adam Moffett" <[email protected]> wrote: PVC pipe hanging strap. It's not less embarrassing than zip ties though. I don't have one of those PoE's handy....are there no keyholes on the back? To all equipment vendors: It costs zero dollars extra to put keyholes in the back of your housing. Ok, it's not free to retool after you've already done it wrong, but honestly is there any reason NOT to put them in? Since it is the only Cambium POE option...does anyone have any idea how to mount them into place? My only idea is a cable tie and zip ties which is embarrassing. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
