Oh the cable management!!! That's a slick idea. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 13, 2015 12:34 PM, "Ken Hohhof" <af...@kwisp.com> wrote:
> Like the grey stuff between the 2 DIN rails in this photo. I’m not a big > fan of wire duct, but some people here use it extensively (like George and > Jaime). > > *From:* Josh Luthman <j...@imaginenetworksllc.com> > *Sent:* Thursday, August 13, 2015 11:19 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Mounting ePMP poes > > > Customers. Towers get sync injectors. > > I'm not sure what you're talking about...wire ducting on DIN? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Aug 13, 2015 12:06 PM, "Ken Hohhof" <af...@kwisp.com> wrote: > >> Is this for customer locations, or your own tower boxes? >> >> Do you use wire duct in your DIN rail boxes? That plastic stuff with >> fingers and a cover? We have some from Panduit with sticky tape on the >> back. If you have some the right size to grip the POE, maybe cut a short >> piece of that? >> >> *From:* Josh Luthman <j...@imaginenetworksllc.com> >> *Sent:* Thursday, August 13, 2015 11:02 AM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] Mounting ePMP poes >> >> That would be the POE that needs replaced every year for sure =P >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Thu, Aug 13, 2015 at 12:00 PM, Christopher Tyler < >> ch...@totalhighspeed.net> wrote: >> >>> Glue a DIN rail mount to the back of the PoE maybe? Use some good strong >>> glue, Elmers white probably won't cut it :) >>> >>> -- >>> Christopher Tyler >>> MTCRE/MTCNA/MTCTCE/MTCWE >>> Total Highspeed Internet Services >>> 417.851.1107 >>> >>> ----- Original Message ----- >>> From: "Andy Trimmell" <atrimm...@precisionds.com> >>> To: af@afmug.com >>> Sent: Thursday, August 13, 2015 10:39:45 AM >>> Subject: Re: [AFMUG] Mounting ePMP poes >>> >>> for toughswitch mounts I buy the Maxxwave wallmount from baltic. >>> >>> >>> >>> From: Af [mailto:af-boun...@afmug.com] On Behalf Of David >>> Sent: Thursday, August 13, 2015 8:41 AM >>> To: af@afmug.com >>> Subject: Re: [AFMUG] Mounting ePMP poes >>> >>> >>> >>> Josh, >>> Here is what we did using an enclosure and some velcro straps >>> >>> >>> >>> >>> >>> On 08/12/2015 08:55 PM, Josh Luthman wrote: >>> >>> NOTHING to work with :( >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Aug 12, 2015 9:50 PM, "Adam Moffett" <dmmoff...@gmail.com> >>> wrote: >>> >>> PVC pipe hanging strap. It's not less embarrassing than zip >>> ties though. >>> >>> I don't have one of those PoE's handy....are there no keyholes >>> on the back? >>> >>> To all equipment vendors: It costs zero dollars extra to put >>> keyholes in the back of your housing. Ok, it's not free to retool after >>> you've already done it wrong, but honestly is there any reason NOT to put >>> them in? >>> >>> Since it is the only Cambium POE option...does anyone have any >>> idea how to mount them into place? My only idea is a cable tie and zip >>> ties which is embarrassing. >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> >>> >>> >>> >>> >> >
