Uh how did it with with a wrong gateway before? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 20, 2015 8:19 AM, "Tyler Treat" <[email protected]> wrote:
> So somewhere along this timeframe, they stated some extra fact checking on > the IP configuration side. (I didn't program this radio originally) but > after a while I realized the gateway was wrong - had to CLI the gateway and > it started working fine. > > So if you have a radio doing something stupid like this, check and make > sure the gateway Ip is accurate. This one was 1 digit off of what it > should have been. .8 vs .9! > Takes several hours of saying WTF to the radio on the other end of a > Citrix session to arrive at that little gem. > > > > > On Aug 20, 2015, at 12:55 AM, Tyler Treat <[email protected]> > wrote: > > So it seems like between 2.3.4 and 2.4 this thing decides to stop allowing > changes to be saved. Any ideas? > > ___________________________ > Mangled by my iPhone. > ___________________________ > > Tyler Treat > Corn Belt Technologies, Inc. > > [email protected] > ___________________________ > > > On Aug 19, 2015, at 11:11 PM, Tyler Treat <[email protected]> > wrote: > > Soooo the AP side won't allow saving changes? > Any ideas? > > ___________________________ > Mangled by my iPhone. > ___________________________ > > Tyler Treat > Corn Belt Technologies, Inc. > > [email protected] > ___________________________ > > > On Aug 19, 2015, at 10:44 PM, Tyler Treat <[email protected]> > wrote: > > Taking this a step further- > Eptp mode. Any caveats to turning this on? > > ___________________________ > Mangled by my iPhone. > ___________________________ > > Tyler Treat > Corn Belt Technologies, Inc. > > [email protected] > ___________________________ > > > On Aug 19, 2015, at 5:06 PM, Tyler Treat <[email protected]> > wrote: > > Thanks guys! > > I'll try it tonight! > > > ------------------------------ > *From:* Af <[email protected]> on behalf of Josh Luthman < > [email protected]> > *Sent:* Wednesday, August 19, 2015 5:02 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] epmp update path > > > All my new radios are 1.2.3. I upgrade to 2.4.3 for the last couple weeks > no problem. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Aug 19, 2015 5:55 PM, "Mathew Howard" <[email protected]> wrote: > >> I haven't seen any issues going from as far back as, I think, 1.2 on the >> bench directly to 2.4.3. >> >> On Wed, Aug 19, 2015 at 4:52 PM, Joe Novak <[email protected]> wrote: >> >>> on the bench I took and upgraded from whatever FW they came with (it had >>> a black interface) to the newest no issue that I know of. YMMV as always >>> >>> On Wed, Aug 19, 2015 at 4:42 PM, David <[email protected]> wrote: >>> >>>> I think you will need to move to 2.4 before jumping to 2.4.3 >>>> >>>> >>>> On 08/19/2015 04:33 PM, Tyler Treat wrote: >>>> >>>> >>>> Hey folks -� >>>> >>>> We have a mix of ePMP radios that we want to get to current firmware. � >>>> Is there a specific upgrade path from 1.4.0 to current, or can i just >>>> move to 2.4.3 >>>> >>>> >>>> >>>> Thanks >>>> >>>> Tyler >>>> >>>> >>>> >>> >>
