We have used it on a couple links with no issue but be sure 2.4.3 is
loaded. I have seen better performance than the latter firmware on
2.4.3
On 08/19/2015 10:42 PM, Tyler Treat wrote:
Taking this a step further-
Eptp mode. Any caveats to turning this on?
___________________________
Mangled by my iPhone.
___________________________
Tyler Treat
Corn Belt Technologies, Inc.
[email protected] <mailto:[email protected]>
___________________________
On Aug 19, 2015, at 5:06 PM, Tyler Treat <[email protected]
<mailto:[email protected]>> wrote:
Thanks guys!
I'll try it tonight!
------------------------------------------------------------------------
*From:* Af <[email protected] <mailto:[email protected]>> on
behalf of Josh Luthman <[email protected]
<mailto:[email protected]>>
*Sent:* Wednesday, August 19, 2015 5:02 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] epmp update path
All my new radios are 1.2.3. I upgrade to 2.4.3 for the last couple
weeks no problem.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Aug 19, 2015 5:55 PM, "Mathew Howard" <[email protected]
<mailto:[email protected]>> wrote:
I haven't seen any issues going from as far back as, I think, 1.2
on the bench directly to 2.4.3.
On Wed, Aug 19, 2015 at 4:52 PM, Joe Novak <[email protected]
<mailto:[email protected]>> wrote:
on the bench I took and upgraded from whatever FW they came
with (it had a black interface) to the newest no issue that I
know of. YMMV as always
On Wed, Aug 19, 2015 at 4:42 PM, David <[email protected]
<mailto:[email protected]>> wrote:
I think you will need to move to 2.4 before jumping to 2.4.3
On 08/19/2015 04:33 PM, Tyler Treat wrote:
Hey folks -�
We have a mix of ePMP radios that we want to get to
current firmware. � Is there a specificupgrade path from
1.4.0 to current, or can i just move to 2.4.3
Thanks
Tyler
