We moved to 13.4 primarily to benefit from the new configuration back-up/restore capability. From our experience we ran into the two issues I mentioned earlier and one additional issue didnt report. The third issue is that the PPPoE password does not seem to carry forward. Theres a chance that all three issues are somehow due to some mistake I made but I hope to ID the cause either way soon. Im thinking about just offering to sending Cambium one of my radios with the symptoms for analysis if they are willing. This would likely be easier for everyone.
Steve B. From: Af [mailto:[email protected]] On Behalf Of George Skorup Sent: Wednesday, September 09, 2015 8:28 PM To: [email protected] Subject: Re: [AFMUG] 13.4 Firmware on PMP100 PPPoE on the SM or on the customer equipment? If on the SM, I'm pretty sure this has been brought up quite a few times going back quite a while. I know others have mentioned that SM registration auth via RADIUS is giving similar issues. Well, at least the session stuck in a state where the SM is unmanageable or something like that. I'm not doing PPPoE or RADIUS for SM auth, but I am considering going to NAT in the SM w/ DMZ now that the NAT speed has been greatly improved with 13.2+. I really wanted 13.4 loaded up first so I can create a config template so the guys don't have to get too involved with setting everything up in every single SM multiple times per day. I hope to test this up on a site once they get 13.4.1 builds in our hands. I bet Aaron is sooo happy to be back on the list. :) On 9/9/2015 6:52 PM, Wireless Administrator wrote: Just to do pppoe auth. Steve � From: Af [mailto:[email protected]] On Behalf Of George Skorup Sent: Wednesday, September 09, 2015 7:44 PM To: [email protected] Subject: Re: [AFMUG] 13.4 Firmware on PMP100 � Are you running RADIUS? On 9/9/2015 6:22 PM, Wireless Administrator wrote: I have two open tickets that I need to work on with Cambium. � · SM�s hang � Not passing customer data and no response on Wan side.� Power on reset required. · Installers unable to access the SM in NAT mode from the Ethernet side.� Responds to ping but not telnet or browser.� If you catch it within seconds of post completion you can get in with browser. � Anyone else having issues?� I need to provide Cambium the details they requested to move forward with problem determination. � Steve B. � �
