Dave, The SM’s I’ve had the issue with are connectorized and didn’t have an antenna attached to them so I’m pretty sure they were not registering. I was at the base of the tower so I guess anything would be possible. The Radios I experienced the problem on were either P9 or P10. I did notice the NAT table size option and did experience a hung radio with it set to a larger size (Believe 8182). I defaulted the radio and set it to 2048 and it seemed fine.
Steve From: Af [mailto:[email protected]] On Behalf Of David Sovereen Sent: Thursday, September 10, 2015 9:03 AM To: [email protected] Subject: Re: [AFMUG] 13.4 Firmware on PMP100 Do your SMs hang in REGISTERING or another state? We have SMs on 13.4 stuck on REGISTERING that only come back by power-cycling them and have a ticket open with Cambium on it. They’ve acknowledged the issue but haven’t provided even a beta or test version that might fix it. Dave On Sep 9, 2015, at 7:22 PM, Wireless Administrator <[email protected]> wrote: I have two open tickets that I need to work on with Cambium. · SM’s hang – Not passing customer data and no response on Wan side. Power on reset required. · Installers unable to access the SM in NAT mode from the Ethernet side. Responds to ping but not telnet or browser. If you catch it within seconds of post completion you can get in with browser. Anyone else having issues? I need to provide Cambium the details they requested to move forward with problem determination. Steve B.
