I should mention that you can do this with 3/4" non metallic liquidtight flex conduit, or if you want to run DC power in parallel to a termination block in the same enclosure (such as a 16-conductor 18AWG cable) you can use 1" or 1.5" liquidtight.
On Sat, Sep 12, 2015 at 4:09 PM, Eric Kuhnke <[email protected]> wrote: > If you want to terminate fiber up a tower, use your choice of enclosure > with aluminum backboard, run non metallic flex conduit and fittings to the > enclosure, and a 24-strand 9/125 G.657.B3 type loose tube cable. Then > terminate it in a single Corning CCH panel: > > > http://catalog.corning.com/opcomm/en-US/catalog/MasterProduct.aspx?cid=SPH_housings1_web&pid=23905&context=;CCS_Global_Web_Catalog;fiber_optic_hardware_web;wall_mountable_hardware_web;SPH_hardware_web;&rot=fiber_optic_hardware_web > > Stick the single panel housing down onto the backboard. > > I recommend a CCH 12-strand, SC/UPC duplex. This will terminate the fiber > into 6 duplex circuits and leave 12 strands unterminated for future use. If > you want to do all 24 then install two of the SPH housings. > > > catalog.corning.com/opcomm/en-US/catalog/ProductDetails.aspx?cid=CCH_panels_web&pid=21129&vid=22103&rot=fiber_optic_hardware_web&context=;CCS_Global_Web_Catalog;fiber_optic_hardware_web;rack_mountable_hardware_web;CCH_hardware_web;CCH_panels_web;CCH_panels_web > ; > > > I recommend against LC connectors in a tower top box because they're so > small and hard to deal with when the panel is fully populated with patch > cables. > > > > On Thu, Sep 3, 2015 at 2:21 PM, Paul McCall <[email protected]> wrote: > >> Anyone have a favorite reseller/distributor they work with that we can >> also ask a lot of basic questions about our very simple Fiber need? >> >> >> >> Running 6 fiber pre-terminated cable up the tower for instance… >> >> >> >> [image: FieldSmart Small Count Delivery (SCD) Indoor and Outdoor Wall Box >> for Cassette] >> >> >> >> Looking for a simple top of tower (outdoor) box that has LC to LC >> couplers to then plug LC patch cables going to equipment etc. something >> like this without the splicing aspect… >> >> >> >> Looking for attachment techniques of the fiber to the tower on the way up. >> >> >> >> Wanting to Verify that certain pre-terminated fiber would be appropriate >> long-term for outdoor just attached to the tower… like this cable... >> https://www.fiberstore.com/index.php?main_page=advanced_search_result&keyword=50M+Multimode+6+Fiber+LC%2FFC%2FSC%2FST+Pre-terminated+Fiber+Cable&searchSubmit >> = >> >> >> >> >> >> Paul McCall, Pres. >> >> PDMNet / Florida Broadband >> >> 658 Old Dixie Highway >> >> Vero Beach, FL 32962 >> >> 772-564-6800 office >> >> 772-473-0352 cell >> >> www.pdmnet.com >> >> [email protected] >> >> >> > >
