Especially when it's a grand and of questionable quality =/
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 6, 2015 at 12:35 PM, Jeremy <[email protected]> wrote: > Ok, it looks like the Hyperline are available for about $3.80 ea. if you > buy 1K. The other ones are .10 - $1 each from Taiwan, but it is hard for > me to trust my credit card to most of the cheesy looking websites that I > cannot translate. > > On Tue, Oct 6, 2015 at 9:55 AM, Jeremy <[email protected]> wrote: > >> Nope, we use these on every install. We need cheap. >> >> On Tue, Oct 6, 2015 at 9:47 AM, Ken Hohhof <[email protected]> wrote: >> >>> If this is for a high density patch panel application, I guess I would >>> tend toward Panduit. Good stuff, ain’t cheap though. >>> >>> http://www.panduit.com/heiler/InstallInstructions/N-COPN--399--RevG--ENG.pdf >>> >>> >>> *From:* Josh Luthman <[email protected]> >>> *Sent:* Tuesday, October 06, 2015 10:26 AM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] Shielded keystone jacks >>> >>> Line from the radio goes to your RJ45-ECS. The ECS in our case goes to >>> our NEMA enclosure. >>> >>> If you're trying to a rackmounted patch panel the ECS isn't a solution, >>> but I thought I'd offer my solution for this problem. >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Tue, Oct 6, 2015 at 11:23 AM, Ken Hohhof <[email protected]> wrote: >>> >>>> I have tried many and hated them all. Closest I found was some >>>> Signamax jacks I bought from Accu-Tech in Romeoville, IL. >>>> >>>> I’m not sure I follow what Josh is saying, but maybe same as what I >>>> would probably do. I know how to crimp on a shielded RJ45 plug, and they >>>> make shielded pass-through keystone jacks. Basically a panel mount inline >>>> coupler. >>>> >>>> >>>> *From:* Josh Luthman <[email protected]> >>>> *Sent:* Tuesday, October 06, 2015 10:07 AM >>>> *To:* [email protected] >>>> *Subject:* Re: [AFMUG] Shielded keystone jacks >>>> >>>> If it's outside what I do is RJ45-ECS (they changed to shielded a while >>>> back, same part number) and that goes to a WB SS. >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Tue, Oct 6, 2015 at 11:04 AM, Jeremy <[email protected]> wrote: >>>> >>>>> I prefer Union Special Tech keystone jacks, but holy crap they are >>>>> hard to find in the US! For their shielded jacks, they have a little lock >>>>> ring that locks the cable down tight (strain relief), and provides an >>>>> awesome ground. That strain relief looks like this >>>>> http://www.netkey.ru/content/img/wmc_pictures/2008/9/img/kj2-c6-sh-f-wh.jpg >>>>> >>>>> That model is KJ2-C5E-FS, and I am having an extremely difficult time >>>>> finding it. I have found these in the past for around $1 ea. All I am >>>>> finding now are these crappy ones that I can't stand for around $2-3 ea. >>>>> https://www.firefold.com/cat5e-keystone-jack-110-shielded?gclid=CIztiaGOrsgCFc-FfgodwGsLwg >>>>> >>>>> What are you guys using for shielded keystone jacks? Any good sources >>>>> for them at reasonable prices? I am looking to buy 1000. I have >>>>> contacted >>>>> the manufacturer in Taiwan on multiple occasions and do not get a reply. >>>>> >>>> >>>> >>> >>> >> >> >
