The electronics only work with one polarity. AFAIK it's only SAF that can do 48vdc or -48vdc. I'm sure there's other things, but I haven't seen them.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Oct 7, 2015 at 2:09 PM, Matt Hoppes <[email protected]> wrote: > I was under the impression the GPS APs would take straight power from > the Netonix and the CPEs would auto switch? > > > Matt Hoppes > Director of Information Technology > Indigo Wireless > +1 (570) 723-7312 > > On 10/7/15 1:48 PM, Josh Luthman wrote: > > I thought Netonix could simply swap the polarity? > > > > The pinout is the same, but blue/brown is hot/neutral for Ubnt/Mikrotik > > > > brown/blue is hot/neutral for Motorola/Trango/Cambium > > > > > > Josh Luthman > > Office: 937-552-2340 > > Direct: 937-552-2343 > > 1100 Wayne St > > Suite 1337 > > Troy, OH 45373 > > > > On Wed, Oct 7, 2015 at 1:47 PM, Darin Steffl <[email protected] > > <mailto:[email protected]>> wrote: > > > > Hello all, > > > > We're going to power some ePMP GPS AP's with a Netonix switch. I > > understand I can power them with either 24V or 48V but the pinout is > > different than standard Ubiquiti passive POE that we're used to. > > > > Which color wires do we swap on one side of the cable termination to > > properly power the ePMP GPS AP's? I found online possibly we swap > > the blue and brown pairs but just want to double check here. > > > > Thanks > > > > -- > > Darin Steffl > > Minnesota WiFi > > www.mnwifi.com <http://www.mnwifi.com/> > > 507-634-WiFi > > <http://www.facebook.com/minnesotawifi> Like us on Facebook > > <http://www.facebook.com/minnesotawifi> > > > > > > > > > > _______________________________________________ > > Members mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/members > > > _______________________________________________ > Members mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/members >
