Ok - so it seems you need to disable the 'PoE Smart' function on the Netonix interface for it to work. This switch is running 1.3.4.
On Wed, Oct 7, 2015 at 2:43 PM, Josh Luthman <[email protected]> wrote: > OOOH the poe and 802.3af I get it now. Couldn't see the forest through > the trees. Very nice stuff!!! > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Wed, Oct 7, 2015 at 2:31 PM, Faisal Imtiaz <[email protected]> > wrote: > >> ------------------------- >> ...................The radio supports an input voltage range of 23 – 56 V >> and the PoE interface is 802.3af compliant. >> >> ...................Alternatively, the radio can be powered by 802.3af PoE >> compliant switches. >> --------------------------------------------- >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> >> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >> >> ------------------------------ >> >> *From: *"Josh Luthman" <[email protected]> >> *To: *[email protected] >> *Cc: *"Principal WISPA Member List" <[email protected]>, "[email protected]" >> <[email protected]> >> *Sent: *Wednesday, October 7, 2015 2:13:05 PM >> *Subject: *Re: [WISPA Members] [AFMUG] ePMP Poe pinout for Netonix Switch >> >> It doesn't say that under 2.3 under powering - where do you see it?? >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Wed, Oct 7, 2015 at 2:11 PM, Faisal Imtiaz <[email protected]> >> wrote: >> >>> It is always the best to check the exact specs on the radio spec sheet... >>> >>> See enclosed.... According to it, ONLY the Connectorized w/SYNC (AP) >>> Radios appear to be 'dual polarized' on the poe side. >>> You can power them with the standard 802.3af poe switch...(24v or 48v) >>> >>> So, you should be able to use the straight cable into the Netonix for >>> these. >>> >>> (The spec sheet also implies that the integrated radios or the ones >>> without SYNC are not dual polarized on the poe...) >>> >>> >>> Regards. >>> >>> Faisal Imtiaz >>> Snappy Internet & Telecom >>> 7266 SW 48 Street >>> Miami, FL 33155 >>> Tel: 305 663 5518 x 232 >>> >>> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >>> >>> ------------------------------ >>> >>> *From: *"Darin Steffl" <[email protected]> >>> *To: *[email protected], "[email protected]" <[email protected]>, "Principal >>> WISPA Member List" <[email protected]> >>> *Sent: *Wednesday, October 7, 2015 1:47:10 PM >>> *Subject: *[AFMUG] ePMP Poe pinout for Netonix Switch >>> >>> Hello all, >>> We're going to power some ePMP GPS AP's with a Netonix switch. I >>> understand I can power them with either 24V or 48V but the pinout is >>> different than standard Ubiquiti passive POE that we're used to. >>> >>> Which color wires do we swap on one side of the cable termination to >>> properly power the ePMP GPS AP's? I found online possibly we swap the blue >>> and brown pairs but just want to double check here. >>> >>> Thanks >>> >>> -- >>> Darin Steffl >>> Minnesota WiFi >>> www.mnwifi.com >>> 507-634-WiFi >>> <http://www.facebook.com/minnesotawifi> Like us on Facebook >>> <http://www.facebook.com/minnesotawifi> >>> >>> >> >> _______________________________________________ >> Members mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/members >> >> > > _______________________________________________ > WISP mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wisp > >
