OOOH the poe and 802.3af I get it now. Couldn't see the forest through the trees. Very nice stuff!!!
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Oct 7, 2015 at 2:31 PM, Faisal Imtiaz <[email protected]> wrote: > ------------------------- > ...................The radio supports an input voltage range of 23 – 56 V > and the PoE interface is 802.3af compliant. > > ...................Alternatively, the radio can be powered by 802.3af PoE > compliant switches. > --------------------------------------------- > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > > Help-desk: (305)663-5518 Option 2 or Email: [email protected] > > ------------------------------ > > *From: *"Josh Luthman" <[email protected]> > *To: *[email protected] > *Cc: *"Principal WISPA Member List" <[email protected]>, "[email protected]" > <[email protected]> > *Sent: *Wednesday, October 7, 2015 2:13:05 PM > *Subject: *Re: [WISPA Members] [AFMUG] ePMP Poe pinout for Netonix Switch > > It doesn't say that under 2.3 under powering - where do you see it?? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Wed, Oct 7, 2015 at 2:11 PM, Faisal Imtiaz <[email protected]> > wrote: > >> It is always the best to check the exact specs on the radio spec sheet... >> >> See enclosed.... According to it, ONLY the Connectorized w/SYNC (AP) >> Radios appear to be 'dual polarized' on the poe side. >> You can power them with the standard 802.3af poe switch...(24v or 48v) >> >> So, you should be able to use the straight cable into the Netonix for >> these. >> >> (The spec sheet also implies that the integrated radios or the ones >> without SYNC are not dual polarized on the poe...) >> >> >> Regards. >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> >> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >> >> ------------------------------ >> >> *From: *"Darin Steffl" <[email protected]> >> *To: *[email protected], "[email protected]" <[email protected]>, "Principal >> WISPA Member List" <[email protected]> >> *Sent: *Wednesday, October 7, 2015 1:47:10 PM >> *Subject: *[AFMUG] ePMP Poe pinout for Netonix Switch >> >> Hello all, >> We're going to power some ePMP GPS AP's with a Netonix switch. I >> understand I can power them with either 24V or 48V but the pinout is >> different than standard Ubiquiti passive POE that we're used to. >> >> Which color wires do we swap on one side of the cable termination to >> properly power the ePMP GPS AP's? I found online possibly we swap the blue >> and brown pairs but just want to double check here. >> >> Thanks >> >> -- >> Darin Steffl >> Minnesota WiFi >> www.mnwifi.com >> 507-634-WiFi >> <http://www.facebook.com/minnesotawifi> Like us on Facebook >> <http://www.facebook.com/minnesotawifi> >> >> > > _______________________________________________ > Members mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/members > >
