So if I’m using non-DFS frequencies just leave Frequency 2 & 3 at 0?
From: Af [mailto:[email protected]] On Behalf Of Josh Luthman Sent: Tuesday, October 13, 2015 2:12 PM To: [email protected] Subject: Re: [AFMUG] AirFiber 5x Frequencies You have to specify the same frequencies. That's how it works. Secondary and tertiary are for DFS. Chuck said it won't be necessary for 5.1 and 5.7 sometime. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Oct 13, 2015 11:04 AM, "Justin Marshall" <[email protected]<mailto:[email protected]>> wrote: Hi, Just wondering what everyone else is doing as far as AirFiber 5x frequencies… In the newest firmware, It has a spots for 3 frequencies. Their user guide only says it should have an option for a separate tx and rx frequency. I’ve done a quick search of the UBNT forums and I haven’t found an explanation (at least not in English) Am I to assume Frequency 1 is the TX, Frequency 2 is the RX, and 3 is an alternate? If Frequency 1 is the TX and 2 is the RX… is it best to choose 2 different bands for those? (5.2 for tx/5.7 for rx?) Just curious how everyone else is doing it. Thanks Justin [email protected]<mailto:[email protected]>
