Consider it good. Been running that split load for some time with NO
issues.
On 10/13/2015 3:04 PM, Justin Marshall wrote:
3.0.2.1 is the latest stable
Looks like they don’t add support for split frequencies until the
3.0.3-beta2 (still in beta…)
--------------------------------------------
Version 3.0.3-beta2 (June 4, 2015)
--------------------------------------------
New Features:
- Support for split rx and tx frequencies
*From:*Af [mailto:[email protected]] *On Behalf Of *Justin Marshall
*Sent:* Tuesday, October 13, 2015 3:52 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] AirFiber 5x Frequencies
AF06.v3.0.2.1
*From:*Af [mailto:[email protected]] *On Behalf Of *Chuck Macenski
*Sent:* Tuesday, October 13, 2015 3:46 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] AirFiber 5x Frequencies
What software release are you running?
On Tue, Oct 13, 2015 at 2:29 PM, Justin Marshall <[email protected]
<mailto:[email protected]>> wrote:
I don’t see any option for “split frequency mode”…
I see that mentioned in the user guide, but it’s not on the page …
(see attached)
*From:*Af [mailto:[email protected] <mailto:[email protected]>]
*On Behalf Of *Chuck Macenski
*Sent:* Tuesday, October 13, 2015 2:49 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] AirFiber 5x Frequencies
Hi,
Yes, those are only intended for DFS fallback at the moment. If you
are not using DFS frequencies, you can select the split frequency mode
and freq 2 and 3 will be replaced by an rx and tx frequency selection.
The scanning algorithm has a number of changes coming in future
releases so stay tuned...
Chuck
On Tue, Oct 13, 2015 at 1:26 PM, Justin Marshall <[email protected]
<mailto:[email protected]>> wrote:
So if I’m using non-DFS frequencies just leave Frequency 2 & 3 at 0?
*From:*Af [mailto:[email protected] <mailto:[email protected]>]
*On Behalf Of *Josh Luthman
*Sent:* Tuesday, October 13, 2015 2:12 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] AirFiber 5x Frequencies
You have to specify the same frequencies. That's how it works.
Secondary and tertiary are for DFS. Chuck said it won't be necessary
for 5.1 and 5.7 sometime.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Oct 13, 2015 11:04 AM, "Justin Marshall" <[email protected]
<mailto:[email protected]>> wrote:
Hi,
Just wondering what everyone else is doing as far as AirFiber 5x
frequencies…
In the newest firmware, It has a spots for 3 frequencies. Their user
guide only says it should have an option for a separate tx and rx
frequency.
I’ve done a quick search of the UBNT forums and I haven’t found an
explanation (at least not in English)
Am I to assume Frequency 1 is the TX, Frequency 2 is the RX, and 3 is
an alternate?
If Frequency 1 is the TX and 2 is the RX… is it best to choose 2
different bands for those? (5.2 for tx/5.7 for rx?)
Just curious how everyone else is doing it.
Thanks
Justin
[email protected] <mailto:[email protected]>
