It looks like you could aggregate two non-contiguous 40mhz channels an the same path, yes (I'm assuming it works the same as the B5), but for full capacity you would need to license two 80mhz channels - so you'd need two sets of two contiguous 40mhz channels.
On Wed, Oct 14, 2015 at 5:28 PM, Ken Hohhof <[email protected]> wrote: > Are you suggesting that if an 80 MHz channel (2 adjacent 40 MHz channels) > was not available, you could license two non-contiguous 40 MHz channels on > the same path and the radio would aggregate them capacity? > > *From:* Peter Kranz <[email protected]> > *Sent:* Wednesday, October 14, 2015 5:22 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Any interesting multi-gigabit backhauls at > wispalooza.. > > > This radio works like the other mimosa products, you have the following > channel options > > > > 1x20 pair > > 1x40 pair > > 1x80 pair > > 2x20 pairs > > 2x40 pairs > > 2x80 pairs > > > > I assume both sites transmit on all available channels... So 2x80 actually > transmits on 4 channels (2 low and 2 high) – Achieving their 4x4 MIMO deal.. > > > > > *Peter Kranz*www.UnwiredLtd.com <http://www.unwiredltd.com/> > Desk: 510-868-1614 x100 > Mobile: 510-207-0000 > [email protected] > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Ken Hohhof > *Sent:* Wednesday, October 14, 2015 3:16 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Any interesting multi-gigabit backhauls at > wispalooza.. > > > > How does that work from a frequency coordination standpoint? I guess you > need the same frequency clear in both directions. Given that Part 101 > channels come in pairs (high and low), does the other one go unused? Or do > the radios use both frequencies in both directions? > > > > Are the frequency coordinators ready for these? > > > > > > *From:* Josh Luthman <[email protected]> > > *Sent:* Wednesday, October 14, 2015 5:06 PM > > *To:* [email protected] > > *Subject:* Re: [AFMUG] Any interesting multi-gigabit backhauls at > wispalooza.. > > > > It's not FDX > > > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Wed, Oct 14, 2015 at 6:03 PM, Gino Villarini <[email protected]> > wrote: > > So can anyone expand on the channel usage on this units? It sees it uses > the same channel on both locations? > > > > On Wed, Oct 14, 2015 at 5:56 PM, Mathew Howard <[email protected]> > wrote: > > If UBNT did anything with licensed, it would obviously need to be > airfiber... but looking at what they have, I doubt they'd get under $2k. > > > > On Wed, Oct 14, 2015 at 4:52 PM, Josh Luthman <[email protected]> > wrote: > > Dude they can't even get sync to work on multipoint. > > The quality necessary for licensed makes 2k an unbelievable price point. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Oct 14, 2015 2:41 PM, "Brian Sullivan" <[email protected]> > wrote: > > I wish UBNT would jump on board with licensed gear. I'll bet they could > offer the same thing for 1/2 the price. > > On 10/14/2015 4:34 PM, Darin Steffl wrote: > > $2k MSRP per radio plus antenna which are sold at Streakwave and DR. This > is the best price point per meg on 11ghz licensed links. > > > > On Wed, Oct 14, 2015 at 2:31 PM, Tyler Treat <[email protected]> > wrote: > > what price are they touting? > > > ------------------------------ > > *From:* Af <[email protected]> on behalf of Peter Kranz < > [email protected]> > *Sent:* Wednesday, October 14, 2015 4:28 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Any interesting multi-gigabit backhauls at > wispalooza.. > > > > Thanks, I am aware of how it works. at 10km the B11 offers a 1560 Mbps PHY > rate, and a 1248 Mbps TCP data rate. So if one was to spend 50% of the > budget on upload, they would see a 624 Mbps full duplex link. Which as I > was saying before is meh inducing other than the good price point. > > > > >> There is no full duplex on the B11. It is auto-TDMA and is flexible so > you're not limited to 750 Mbps one way. You could have 1000 Mbps one way > and 500 the other way. The SFP at 1G is what would limit the speed to 1G on > downstream. > > > > > > > > -- > > Darin Steffl > > Minnesota WiFi > > www.mnwifi.com > > 507-634-WiFi > > <http://www.facebook.com/minnesotawifi> Like us on Facebook > <http://www.facebook.com/minnesotawifi> > > > > > > > > >
