It looks like his graph is stacked.
On Fri, Nov 6, 2015 at 3:55 PM, Bill Prince <[email protected]> wrote:
> I don't understand the Y scale on your frame utilization. Is that percent,
> or what? And how can you get 150% frame utilization?
>
> bp
> <part15sbs{at}gmail{dot}com>
>
>
> On 11/6/2015 9:50 AM, Eric Muehleisen wrote:
>
>> We have a few 450 AP's with 30-40 subscribers and have been getting
>> several slow speed complaints lately. I just chaulked it up to issues
>> with the SM since the AP rarely got over 20mb/s downlink. We upgraded
>> to 13.4 recently so we could watch our frame utilization. We started
>> graphing it over night and as you can see, we are hitting 100% for
>> sustained periods of time. During that time the AP is only doing
>> approx. 23mb/s. This particular AP has 34 registered SM and the
>> majority show 6x and 4x with 4 or 5 SM's at 2x and 1x. The performance
>> is a major disappointment. Anyone else have similar experiences?
>>
>> AP configuration: 20mhz channels, 2.5ms frame, 10 miles, 75% downlink,
>> 3 contention slots.
>>
>> Attached is a screenshot of the utilization and sector throughput
>> calculator from the Capacity Planner R13.
>>
>
>
