Do SC/UPC duplex bulkhead connectors in your tower top box, for example if running 24 strands up a tower. Use SC to LC jumper cables in liquid tight conduit. LC for the radio end of course.
One corning CCH panel is good for twelve strands of SC connectors. There are tiny enclosures for the cch intended for wall mount. They mount on nema4x enclosure aluminium back plates just fine. On Nov 12, 2015 12:56 PM, "Scott Vander Dussen" <[email protected]> wrote: > Thanks for the feedback, few more noob questions- > > > > LC connectors are the best choice for use with SFP modules? > > 50/125um for better distance with 850nm lasers? > > Loose tube flooded and armored is best choice for tower riser without > conduit? > > > > TIA, > > Scott > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Josh Baird > *Sent:* Thursday, November 12, 2015 12:19 > *To:* [email protected] > *Subject:* Re: [AFMUG] Fiber up a tower > > > > We are ordering pre-terminated armored CommScope fiber from Best-Tronics > and running it from a router at the base of the tower to a switch at the > top. I would suggest giving BT a call. > > > > Josh > > > > On Thu, Nov 12, 2015 at 2:13 PM, Scott Vander Dussen <[email protected]> > wrote: > > Wanting to upgrade several towers with fiber up to the backhauls, any > recommendations for specific product or procedures to do the job right the > first time? > > >
