Make it optical except for the last 2' of cable. Small ip67 rated box, some glands
single mode fiber to a backplate mounted SC/UPC duplex bulkhead Meanwell 36-72vdc input, 12vdc output 20W rated DC DC converter Good quality 1000baseT to SFP media converter (12V powered) One 1310nm LX SFP 30cm length SC/UPC to LC/UPC 9/125 duplex sm patch cord 40-70cm shielded cat5e from media converter to af24 Or try more ferrites. On Nov 18, 2015 6:51 AM, "Eric Muehleisen" <[email protected]> wrote: > We have a situation where an AirFiber is struggling to maintain a > gigabit ethernet connection. It's right next to a FM antenna. We've > replaced the ~75ft. patch cable with belden shielded CAT5 and shielded > ends. We've replaced the cable a couple time now. It will run gigabit > in good conditions, but as soon as it rains or snows, the link bounces > between gig and 100meg. Both ends are shielded and bonded. > > My question is, I would like to replace the cable again but with > tested factory made outdoor shielded CAT5e or CAT6 at 75ft. I cannot > seem to find a quality outdoor rated STP cable at custom lengths that > is at least 24AWG solid wire. > > If anyone can make a recommendation, that would be great. >
