[AFMUG] 450 SM corrupt flash?

[George Skorup]

Had to go out and power-cycle a 450 SM at a micro-POP tonight. I've seen 
this once before, but a reboot fixed it. This one is a bit different 
though. It appeared to be crashed and multiple power-cycles didn't clear 
this garbage out of the event log and if I try to clear it, I get 
"Unsaved changes and reboot required" in red at the top of the pages. 
Any other config changes causes the same thing to happen. I had to go to 
unit settings and click undo unit-wide saved changes. At least it's 
working for now. Anyone else seen this? Is there any way to fix it?

K������� 16 ( 0%) 0 0 0 0 (12284/ 6%/29%) Suspend 0x8001bd4
COMM������� 17 ( 0%) 0 0 0 0 (12284/ 2%/31%) Ready 0x8001bd4
EAPP������� 19 ( 0%) 0 0 0 0 (12284/ 2%/15%) Ready 0x8001bd4
VLAN������� 20 ( 0%) 0 0 0 0 (12284/ 2%/12%) PendEvFlgGrp 0x8001bd4
ARPT������� 21 ( 0%) 0 0 0 0 (12284/ 2%/14%) PendEvFlgGrp 0x8001bd4
APPT������� 22 ( 0%) 0 0 0 0 (12284/ 2%/ 9%) PendEvFlgGrp 0x8001bd4
ctic������� 23 ( 0%) 0 0 0 0 (12284/ 2%/14%) Ready 0x8001bd4
Inet������� 24 ( 0%) 0 0 0 0 (12284/ 2%/24%) Suspend 0x8001bd4
BDMT������� 27 ( 0%) 0 0 0 0 (12284/ 2%/12%) Ready 0x8001bd4
BDQT������� 28 ( 0%) 0 0 0 0 (12284/ 2%/15%) Ready 0x8001bd4
FECT������� 29 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x8001bd4
AUTH������� 31 ( 0%) 0 0 0 0 (12284/ 3%/27%) PendEvFlgGrp 0x8001bd4
SNMP������� 32 ( 0%) 0 0 0 0 (12284/ 3%/40%) Suspend 0x8001bd4
teln������� 34 ( 0%) 0 0 0 0 (12284/ 6%/29%) Suspend 0x8001bd4
TEL1������� 35 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x8001bd4
TEL2������� 36 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x8001bd4
TEL3������� 37 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x8001bd4
TEL4������� 38 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x8001bd4
FTPs������� 39 ( 0%) 0 0 0 0 (12284/ 7%/31%) Suspend 0x8001bd4
ROOT������� 46 ( 0%) 0 0 0 0 (12284/ 2%/40%) Suspend 0x8001bd4
UPDM������� 47 ( 0%) 0 0 0 0 (12284/ 2%/11%) PendEvFlgGrp 0x8001bd4
UPDT������� 48 ( 0%) 0 0 0 0 (12284/ 2%/ 9%) PendEvFlgGrp 0x8001bd4
HTTP������� 50 ( 0%) 0 0 0 0 (12284/ 7%/45%) Suspend 0x8001bd4
PROX������� 51 ( 0%) 0 0 0 0 (12284/ 7%/31%) Suspend 0x8001bd4
TFT0������� 53 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) PendQ 0x8001bd4
nvrm������� 55 ( 0%) 0 0 0 0 (12284/ 2%/ 9%) PendEvFlgGrp 0x8001bd4
PING������� 56 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x8001bd4
LLDT������� 57 ( 0%) 0 0 0 0 (12284/ 2%/18%) Ready 0x8001bd4
STAT������� 60 ( 0%) 0 0 0 0 ( 8192/ 3%/17%) Ready 0x8001bd4
IDLE������� 61 ( 0%) 0 0 0 0 ( 8192/ 3%/20%) Ready 0x80019b4
<more stuff>
Task DIAG������� - Priority 10
<more stuff.. DIAG output?>