Cool. So not a hardware issue.
In regards to 14.1.1, please see my post here:
http://community.cambiumnetworks.com/t5/PMP-Beta/Beta-System-Software-14-1-1-Build-8-is-now-available/m-p/46592#U46592
Looks like build 8 isn't adding 3652.5 and 3697.5 default frequencies on
3.6 radios.
And no, I haven't moved beyond 13.2.1 on the 450 network. So if I
upgrade this SM to 14.1.1, will it register to a 13.2.1 AP? And the
other way around, how about 13.2.1 SMs on 14.1.1 APs? There's always
that handful of customers that power off their radios when they're not
using it.
On 11/22/2015 1:45 AM, Aaron Schneider wrote:
Hi George -
This is a bug where the event log gets corrupt and kind of locks
itself in place. If you load the latest 14.1.1 open beta, it will
recover the event log and also has a fix so that any future crash logs
won’t be able to lead to this problem.
Unfortunately there is no way for you to get this back without loading
the new SW. You can load the 14.1.1 image to recover it and then
downgrade it if you aren’t ready to try 14.1.1 yet, but then you’ll be
exposed to seeing this crash log issue again until you upgrade.
We are planning for 14.1.1 to be fully released on Tuesday, but the
open beta load up there now will get you past this problem.
Regards,
-Aaron
From: Af <[email protected] <mailto:[email protected]>> on
behalf of George Skorup <[email protected] <mailto:[email protected]>>
Reply-To: "[email protected] <mailto:[email protected]>" <[email protected]
<mailto:[email protected]>>
Date: Saturday, November 21, 2015 at 10:38 PM
To: "[email protected] <mailto:[email protected]>" <[email protected]
<mailto:[email protected]>>
Subject: Re: [AFMUG] 450 SM corrupt flash?
I should add that the license key info and all of the config is intact.
On 11/21/2015 10:36 PM, George Skorup wrote:
Had to go out and power-cycle a 450 SM at a micro-POP tonight. I've
seen this once before, but a reboot fixed it. This one is a bit
different though. It appeared to be crashed and multiple power-cycles
didn't clear this garbage out of the event log and if I try to clear
it, I get "Unsaved changes and reboot required" in red at the top of
the pages. Any other config changes causes the same thing to happen.
I had to go to unit settings and click undo unit-wide saved changes.
At least it's working for now. Anyone else seen this? Is there any
way to fix it?
K������� 16 ( 0%) 0 0 0 0 (12284/ 6%/29%) Suspend 0x8001bd4
COMM������� 17 ( 0%) 0 0 0 0 (12284/ 2%/31%) Ready 0x8001bd4
EAPP������� 19 ( 0%) 0 0 0 0 (12284/ 2%/15%) Ready 0x8001bd4
VLAN������� 20 ( 0%) 0 0 0 0 (12284/ 2%/12%) PendEvFlgGrp 0x8001bd4
ARPT������� 21 ( 0%) 0 0 0 0 (12284/ 2%/14%) PendEvFlgGrp 0x8001bd4
APPT������� 22 ( 0%) 0 0 0 0 (12284/ 2%/ 9%) PendEvFlgGrp 0x8001bd4
ctic������� 23 ( 0%) 0 0 0 0 (12284/ 2%/14%) Ready 0x8001bd4
Inet������� 24 ( 0%) 0 0 0 0 (12284/ 2%/24%) Suspend 0x8001bd4
BDMT������� 27 ( 0%) 0 0 0 0 (12284/ 2%/12%) Ready 0x8001bd4
BDQT������� 28 ( 0%) 0 0 0 0 (12284/ 2%/15%) Ready 0x8001bd4
FECT������� 29 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x8001bd4
AUTH������� 31 ( 0%) 0 0 0 0 (12284/ 3%/27%) PendEvFlgGrp 0x8001bd4
SNMP������� 32 ( 0%) 0 0 0 0 (12284/ 3%/40%) Suspend 0x8001bd4
teln������� 34 ( 0%) 0 0 0 0 (12284/ 6%/29%) Suspend 0x8001bd4
TEL1������� 35 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x8001bd4
TEL2������� 36 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x8001bd4
TEL3������� 37 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x8001bd4
TEL4������� 38 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x8001bd4
FTPs������� 39 ( 0%) 0 0 0 0 (12284/ 7%/31%) Suspend 0x8001bd4
ROOT������� 46 ( 0%) 0 0 0 0 (12284/ 2%/40%) Suspend 0x8001bd4
UPDM������� 47 ( 0%) 0 0 0 0 (12284/ 2%/11%) PendEvFlgGrp 0x8001bd4
UPDT������� 48 ( 0%) 0 0 0 0 (12284/ 2%/ 9%) PendEvFlgGrp 0x8001bd4
HTTP������� 50 ( 0%) 0 0 0 0 (12284/ 7%/45%) Suspend 0x8001bd4
PROX������� 51 ( 0%) 0 0 0 0 (12284/ 7%/31%) Suspend 0x8001bd4
TFT0������� 53 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) PendQ 0x8001bd4
nvrm������� 55 ( 0%) 0 0 0 0 (12284/ 2%/ 9%) PendEvFlgGrp 0x8001bd4
PING������� 56 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x8001bd4
LLDT������� 57 ( 0%) 0 0 0 0 (12284/ 2%/18%) Ready 0x8001bd4
STAT������� 60 ( 0%) 0 0 0 0 ( 8192/ 3%/17%) Ready 0x8001bd4
IDLE������� 61 ( 0%) 0 0 0 0 ( 8192/ 3%/20%) Ready 0x80019b4
<more stuff>
Task DIAG������� - Priority 10
<more stuff.. DIAG output?>
