I have run into something like this a couple of times with a particular Horizon Compact, but a simple "reset system" resolved it each time. I had a Horizon Compact Plus that was doing this, and although I could telnet into the CLI, executing a "reset system" did nothing - I had to physically power-cycle the unit to resolve that one.
n Darren From: Af [mailto:[email protected]] On Behalf Of Chris Wright Sent: Tuesday, November 24, 2015 6:48 PM To: [email protected] Subject: [AFMUG] Dragonwave management traffic won't route I'm currently dealing with a Dragonwave backhaul giving me grief. Every other device on the tower works great save for the one backhaul which is unreachable unless you're on the same subnet. APs and CPEs on the tower can ping it, the router at the tower can ping it, and I can ping everything on the tower except it. The address/gateway/subnet mask are all correct, and I can verify icmp packets make it all the way to the router to which they are both connected via a L2 switch. In-band management is in use. Anyone run into this before? Chris Wright Network Administrator Velociter Wireless 209-838-1221 x115
