They are in a private /24 All the other dragonwave radios at this site and all the APs, switches, UPSs etc respond just fine. It's just these 3 links that are horizon compacts that only respond when you are directly connected and in that subnet.
-Sean On Monday, November 30, 2015, Kerry <[email protected]> wrote: > Are these units on a /30? Something is rattling around in the dusty > corners of my brain, try a /29 subnet. > > On 11/29/2015 1:24 PM, Sean Heskett wrote: > > I have a couple 23ghz horizon compacts on one subnet of our network and > they show the same symptom that you describe. Dragonwave support told me > it's something with my router or subnet (even though everything else works > and responds just fine) I finally gave up and I have a computer I can > remote into if I need to access those radios. > > If you find a solution I'd love to know what it is...its been driving me > nuts for literally years. > > -Sean > > > On Tuesday, November 24, 2015, Chris Wright < > <javascript:_e(%7B%7D,'cvml','[email protected]');>[email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');>> wrote: > >> I’m currently dealing with a Dragonwave backhaul giving me grief. Every >> other device on the tower works great save for the one backhaul which is >> unreachable unless you’re on the same subnet. APs and CPEs on the tower can >> ping it, the router at the tower can ping it, and I can ping everything on >> the tower except it. The address/gateway/subnet mask are all correct, and >> I can verify icmp packets make it all the way to the router to which they >> are both connected via a L2 switch. In-band management is in use. Anyone >> run into this before? >> >> >> >> Chris Wright >> >> Network Administrator >> >> Velociter Wireless >> >> 209-838-1221 x115 >> >> >> > >
