streak has the ws-6 in stock On Tue, Dec 8, 2015 at 4:12 PM, TJ Trout <[email protected]> wrote:
> actually, just use a ws-12-250-dc and u get your switch and poe in the > same box, just plug your syncinjector and done. alternatively you could use > the ws-12-dc but the 250 will account for the volt drop on the aerial run. > > > > On Tue, Dec 8, 2015 at 4:04 PM, Scott Vander Dussen <[email protected]> > wrote: > >> Why is everything cool that Netonix makes always out of stock! >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *TJ Trout >> *Sent:* Tuesday, December 8, 2015 15:56 >> *To:* [email protected] >> *Subject:* Re: [AFMUG] SyncInjector powering Mimosa B11 >> >> >> >> maybe the apc-din and gige-poe-apc, or maybe a ws-6-mini would be better, >> u can always use as midspan >> >> >> >> On Tue, Dec 8, 2015 at 3:53 PM, George Skorup <[email protected]> wrote: >> >> No definitely don't use the 320/430 injector. You don't need sync over >> power either. Just use a PacketFlux 4 or 8 port GigE PoE injector module. >> Or Chuck's GigE-APC-POE cards. >> >> On 12/8/2015 5:47 PM, Scott Vander Dussen wrote: >> >> Mimosa B11 is 802.11at compliant, power consumption up to 48vdc 30 >> watts. I need a din rail solution to power up 2 B11s; any reason a >> SyncInjector >> for the Canopy 320 and 430 product lines >> <http://store.packetflux.com/syncinjector-for-canopy-320-430-48-volt/> >> wouldn't work just to inject power onto the eth line? Data is through >> fiber. >> >> >> >> >> > >
