LOL, thx- I’ll post some pix when it’s done. I think the WS-12 would suffice despite voltage drop, from website:
“This model is for people who have conditioned 48V DC sites, it expects 48V +/- input but can safely operate on 37V to 53V input as it will condition 24V out from this input range but will pass out the input voltage as the 48V POE option.” From: Af [mailto:[email protected]] On Behalf Of TJ Trout Sent: Tuesday, December 8, 2015 16:14 To: [email protected] Subject: Re: [AFMUG] SyncInjector powering Mimosa B11 power the sync injector off of one of the POE ports, feed the WS-12-250 fiber and you can connect everything to it, even loop fiber back out for the b11 if you must :) wouldn't even need any dc distribution either just DC straight into the netonix, ok I'll shut up now On Tue, Dec 8, 2015 at 4:12 PM, TJ Trout <[email protected]<mailto:[email protected]>> wrote: streak has the ws-6 in stock On Tue, Dec 8, 2015 at 4:12 PM, TJ Trout <[email protected]<mailto:[email protected]>> wrote: actually, just use a ws-12-250-dc and u get your switch and poe in the same box, just plug your syncinjector and done. alternatively you could use the ws-12-dc but the 250 will account for the volt drop on the aerial run. On Tue, Dec 8, 2015 at 4:04 PM, Scott Vander Dussen <[email protected]<mailto:[email protected]>> wrote: Why is everything cool that Netonix makes always out of stock! From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of TJ Trout Sent: Tuesday, December 8, 2015 15:56 To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] SyncInjector powering Mimosa B11 maybe the apc-din and gige-poe-apc, or maybe a ws-6-mini would be better, u can always use as midspan On Tue, Dec 8, 2015 at 3:53 PM, George Skorup <[email protected]<mailto:[email protected]>> wrote: No definitely don't use the 320/430 injector. You don't need sync over power either. Just use a PacketFlux 4 or 8 port GigE PoE injector module. Or Chuck's GigE-APC-POE cards. On 12/8/2015 5:47 PM, Scott Vander Dussen wrote: Mimosa B11 is 802.11at compliant, power consumption up to 48vdc 30 watts. I need a din rail solution to power up 2 B11s; any reason a SyncInjector for the Canopy 320 and 430 product lines<http://store.packetflux.com/syncinjector-for-canopy-320-430-48-volt/> wouldn't work just to inject power onto the eth line? Data is through fiber.
