We get to cuss out cambium and ubnt? Hell yes On Jan 22, 2016 8:12 PM, "TJ Trout" <t...@voltbb.com> wrote:
> is a ccr1009 fast enough for full routes with 2 upsteams? > > On Fri, Jan 22, 2016 at 6:05 PM, George Skorup <geo...@cbcast.com> wrote: > >> I think I went in 2012, 2013 and 2014. >> >> The last time, I remember someone motherf***ing Cambium during Q&A. >> Probably on the 450/FSK combo thing. And then I think someone told UBNT to >> get their heads out of their asses. >> >> So I think a WISPA event is generally more friendly to the vendors. And >> perhaps slightly hostile at such a technical event like AF. >> >> >> On 1/22/2016 3:57 PM, Mathew Howard wrote: >> >> It does seem like half of the list is in northern/central Illinois... >> actually, I fit into the category of being within a two hour drive of you >> too. But... that doesn't seem like it was the case at all for actual Animal >> Farm attendees... I can't remember running into any WISPs from Illinois >> there, (I'm sure there were some, I obviously didn't talk to everyone >> there). >> >> On Fri, Jan 22, 2016 at 2:31 PM, Mike Hammett <af...@ics-il.net> wrote: >> >>> Over the past 200+ years, much of my family has worked on a farm into >>> their 80s, passing sometime in their later 80s or 90s. I expect to be >>> alive and able for another 50 - 60 years. >>> >>> >>> >>> ----- >>> Mike Hammett >>> Intelligent Computing Solutions >>> <http://www.ics-il.com>http://www.ics-il.com >>> >>> <https://www.facebook.com/ICSIL> >>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >>> <https://www.linkedin.com/company/intelligent-computing-solutions> >>> <https://twitter.com/ICSIL> >>> >>> Midwest Internet Exchange >>> <http://www.midwest-ix.com>http://www.midwest-ix.com >>> >>> <https://www.facebook.com/mdwestix> >>> <https://www.linkedin.com/company/midwest-internet-exchange> >>> <https://twitter.com/mdwestix> >>> ------------------------------ >>> *From: *"Mathew Howard" <mhoward...@gmail.com> >>> *To: *"af" <af@afmug.com> >>> *Sent: *Friday, January 22, 2016 2:18:43 PM >>> >>> *Subject: *Re: [AFMUG] Single homed to multi, full partial or default >>> route ? >>> >>> At first I read that as "I don't think I will get to that age" :P >>> >>> >>> On Fri, Jan 22, 2016 at 1:10 PM, Mike Hammett < <af...@ics-il.net> >>> af...@ics-il.net> wrote: >>> >>>> I don't think I will at that age, Ken. Growing up on the farm (and I >>>> still live there), almost everything we did ourselves. Partly due to cost, >>>> partly to make sure it was done right, partly due to emergency nature, etc. >>>> It's just kinda part of me. >>>> >>>> Are there any other parts of the country represented as well on AFMUG >>>> as central\northern Illinois? It seems like half of the list is within a >>>> two hour drive of me. >>>> >>>> >>>> >>>> ----- >>>> Mike Hammett >>>> Intelligent Computing Solutions >>>> <http://www.ics-il.com>http://www.ics-il.com >>>> >>>> <https://www.facebook.com/ICSIL> >>>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >>>> <https://www.linkedin.com/company/intelligent-computing-solutions> >>>> <https://twitter.com/ICSIL> >>>> >>>> Midwest Internet Exchange >>>> <http://www.midwest-ix.com>http://www.midwest-ix.com >>>> >>>> <https://www.facebook.com/mdwestix> >>>> <https://www.linkedin.com/company/midwest-internet-exchange> >>>> <https://twitter.com/mdwestix> >>>> ------------------------------ >>>> *From: *"Ken Hohhof" < <af...@kwisp.com>af...@kwisp.com> >>>> *To: * <af@afmug.com>af@afmug.com >>>> *Sent: *Friday, January 22, 2016 12:57:26 PM >>>> *Subject: *Re: [AFMUG] Single homed to multi, full partial or default >>>> route ? >>>> >>>> When Mike is my age, he’ll be content to call the guy, not be the guy. >>>> Especially at nap time. >>>> >>>> Not sure about Steve, after all, he is That One Guy, so who would he >>>> call? That Other Guy? >>>> >>>> >>>> *From:* That One Guy /sarcasm <thatoneguyst...@gmail.com> >>>> *Sent:* Friday, January 22, 2016 12:49 PM >>>> *To:* <af@afmug.com>af@afmug.com >>>> *Subject:* Re: [AFMUG] Single homed to multi, full partial or default >>>> route ? >>>> >>>> AF, Mike VS Ken, grudge match jousting competition, riding >>>> unicorns..... AF is going to be so awesome net time around >>>> >>>> On Fri, Jan 22, 2016 at 12:21 PM, Chris Wright < <ch...@velociter.net> >>>> ch...@velociter.net> wrote: >>>> >>>>> That is THE question, and it really depends on how well your router >>>>> can handle taking in the full routing table while routing customer traffic >>>>> at the same time. Weaker Mikrotik CCR’s like the 1009 seem sluggish, while >>>>> the 1036 does alright. It’ll pull 500,000+ routes while passing traffic in >>>>> about a minute. >>>>> >>>>> >>>>> >>>>> Chris Wright >>>>> >>>>> Network Administrator >>>>> >>>>> Velociter Wireless >>>>> >>>>> 209-838-1221 x115 <209-838-1221%20x115> >>>>> >>>>> >>>>> >>>>> *From:* Af [mailto: <af-boun...@afmug.com>af-boun...@afmug.com] *On >>>>> Behalf Of *Ken Hohhof >>>>> *Sent:* Friday, January 22, 2016 8:13 AM >>>>> *To:* <af@afmug.com>af@afmug.com >>>>> *Subject:* Re: [AFMUG] Single homed to multi, full partial or default >>>>> route ? >>>>> >>>>> >>>>> >>>>> Dennis, does that help the time to be back up and routing traffic >>>>> after a router reboot or loss of connectivity? So you start using the >>>>> default route as soon as you get it, and then get more specific as the >>>>> routing table fills? That’s something that I’ve heard horror stories >>>>> about, taking like 15 minutes to be back up and running after a router >>>>> reboot or a loss of connectivity to the BGP peer. With a default route, >>>>> I’m used to that being pretty much instantaneous. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> *From:* Dennis Burgess <dmburg...@linktechs.net> >>>>> >>>>> *Sent:* Friday, January 22, 2016 9:52 AM >>>>> >>>>> *To:* <af@afmug.com>af@afmug.com >>>>> >>>>> *Subject:* Re: [AFMUG] Single homed to multi, full partial or default >>>>> route ? >>>>> >>>>> >>>>> >>>>> You have your upstream send default+full, you can discard what you >>>>> don’t need, then if you need something, you don’t have to call them, just >>>>> change your filters. >>>>> >>>>> >>>>> >>>>> Dennis Burgess, CTO, Link Technologies, Inc. >>>>> >>>>> <den...@linktechs.net>den...@linktechs.net – 314-735-0270 x103 – >>>>> <http://www.linktechs.net/>www.linktechs.net >>>>> >>>>> >>>>> >>>>> *From:* Af [ <af-boun...@afmug.com>mailto:af-boun...@afmug.com >>>>> <af-boun...@afmug.com>] *On Behalf Of *TJ Trout >>>>> *Sent:* Thursday, January 21, 2016 8:15 PM >>>>> *To:* <af@afmug.com>af@afmug.com >>>>> *Subject:* [AFMUG] Single homed to multi, full partial or default >>>>> route ? >>>>> >>>>> >>>>> >>>>> I'm a complete idiot and I just turned up 2 upstreams, butch Evans >>>>> will be setting up the bgp, he said I can take full routes, partial router >>>>> /20 and larger or default routes, anyone able to tell me the best choice >>>>> and the pros and cons of each ? >>>>> >>>>> Thanks a million >>>>> >>>> >>>> >>>> >>>> -- >>>> If you only see yourself as part of the team but you don't see your >>>> team as part of yourself you have already failed as part of the team. >>>> >>>> >>> >>> >> >> >
