For a temporary solution you can just use internal timing. I'm sure the water tank blocking GPS is isolating the other sector enough.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 26, 2016 10:36 AM, "Mathew Howard" <[email protected]> wrote: > If the ePMP's GPS already isn't tracking satellites, I'm not sure that > removing the GPS antenna is going to do you much good... the onboard GPS > will still be there without it. > > On Tue, Jan 26, 2016 at 9:23 AM, Andy Trimmell <[email protected]> > wrote: > >> Ive waited upwards of 15 minutes for it to connect. Ive chosen CMM and >> rebooted it but the Cambium GPS is not tracking satellites so it will not >> connect via CMM setting. >> >> >> >> As soon as we climb it and remove it I’ll update you all. >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *Josh Luthman >> *Sent:* Tuesday, January 26, 2016 10:21 AM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] ePMP GPS woes >> >> >> >> I don't think it jumps between sources. The configuration is for one or >> the other. On the main page it'll say GPS sync up or CMM sync up. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Jan 26, 2016 10:16 AM, "Andy Trimmell" <[email protected]> >> wrote: >> >> So we’ve come to the conclusion that even if you’re using CMM as your >> timing source the AP still continues to use the onboard gps if its plugged >> in. >> >> >> >> We have 2 Aps on the same water tower. Both using CMM for their timing. >> Both of them also have their Cambium supplied GPS antenna plugged in >> (emergencies). >> >> >> >> One AP is running 2.4.3 works fine with GPS antenna plugged in and using >> CMM for timing. >> >> One AP is running 2.6 can’t see satellites because the tank is blocking >> its view. Is on CMM but will not get timing from CMM no matter what I do. >> >> >> >> Obviously our next step is to climb the water tank and remove the GPS >> antenna so it stops confusing itself but it’s too windy today to climb. >> >> >> >> If I’m using CMM for my timing why does it care about the cambium >> supplied GPS antenna? It should be disabled when I switch it to CMM. I’ve >> put 2 new Aps on it with same results. >> >> >> >> Conclusion: 2.6 is confused by having 2 timing sources even though you >> choose one. If you’re using CMM for your timing for the love of all things >> fluffy don’t plug in the Cambium supplied GPS antenna. >> > >
