I don’t want temporary anymore. I want me Syncinjector to provide timing like the settings say.
From: Af [mailto:[email protected]] On Behalf Of Josh Luthman Sent: Tuesday, January 26, 2016 10:41 AM To: [email protected] Subject: Re: [AFMUG] ePMP GPS woes For a temporary solution you can just use internal timing. I'm sure the water tank blocking GPS is isolating the other sector enough. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 26, 2016 10:36 AM, "Mathew Howard" <[email protected]> wrote: If the ePMP's GPS already isn't tracking satellites, I'm not sure that removing the GPS antenna is going to do you much good... the onboard GPS will still be there without it. On Tue, Jan 26, 2016 at 9:23 AM, Andy Trimmell <[email protected]> wrote: Ive waited upwards of 15 minutes for it to connect. Ive chosen CMM and rebooted it but the Cambium GPS is not tracking satellites so it will not connect via CMM setting. As soon as we climb it and remove it I’ll update you all. From: Af [mailto:[email protected]] On Behalf Of Josh Luthman Sent: Tuesday, January 26, 2016 10:21 AM To: [email protected] Subject: Re: [AFMUG] ePMP GPS woes I don't think it jumps between sources. The configuration is for one or the other. On the main page it'll say GPS sync up or CMM sync up. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 26, 2016 10:16 AM, "Andy Trimmell" <[email protected]> wrote: So we’ve come to the conclusion that even if you’re using CMM as your timing source the AP still continues to use the onboard gps if its plugged in. We have 2 Aps on the same water tower. Both using CMM for their timing. Both of them also have their Cambium supplied GPS antenna plugged in (emergencies). One AP is running 2.4.3 works fine with GPS antenna plugged in and using CMM for timing. One AP is running 2.6 can’t see satellites because the tank is blocking its view. Is on CMM but will not get timing from CMM no matter what I do. Obviously our next step is to climb the water tank and remove the GPS antenna so it stops confusing itself but it’s too windy today to climb. If I’m using CMM for my timing why does it care about the cambium supplied GPS antenna? It should be disabled when I switch it to CMM. I’ve put 2 new Aps on it with same results. Conclusion: 2.6 is confused by having 2 timing sources even though you choose one. If you’re using CMM for your timing for the love of all things fluffy don’t plug in the Cambium supplied GPS antenna.
