Jerry,
Thanks I guess we will give it a try. Right now we have it sliced up into 40
degree panels. So we had an ABAB configuration on horizontal. Above the
center two (BA) I also had a AB in horizontal. When I turned off B to use
that frequency on the new 450i I of course created some serious congestion
on the remaining FSK. So my current configuration is O = off
, A,O Horizontal
A,O,A,O Vertical
I would like to try and do
,A,O
O,A,O,A
This will give me a better balance until we can convert more to the 450i.
If anyone else has thoughts please chime in. Ill be sure to report back.
Not that many people are doing FSK 900 but hopefully many are migrating.
Best regards,
Brandon Yuchasz
GogebicRange.net
www.gogebicrange.net <http://www.gogebicrange.net/>
From: Af [mailto:[email protected]] On Behalf Of Jerry Head
Sent: Sunday, February 14, 2016 11:29 AM
To: [email protected]
Subject: Re: [AFMUG] FSK question.
it has/is working for me at two of my sites.
YMMV of course.
On 2/14/2016 11:27 AM, Brandon Yuchasz wrote:
We are migrating a FSK site to PMP450i 900mhz and because of that I need to
turn off some FSK to make room in the frequency for the new 450i. Nothing
new everyone runs into it I am sure. My question is has anyone run FSK
900mhz on the same frequency on both vertical and horizontal polarities with
just vertical separation on the panel antennas?� I have done this in the
past but we always offset them in an AB horizontal and a BA vertical. In
this case I want to stack them directly above each other� AA no B. Clear
as mud? We have a break in the weather coming next week it should be in the
20�s with light wind but I don�t want to waist a climb and a day if its
not going to work.
�
�
Best regards,
Brandon Yuchasz
GogebicRange.net
www.gogebicrange.net <http://www.gogebicrange.net/>
�
