Do you mean 6.34.2? That's the current release for ARM. You could also
try 6.35-rc12. There's nothing in any changelogs about it, but MikroTik
is notorious for fixing/breaking stuff and not telling anybody.
On 2/21/2016 7:08 PM, Ken Hohhof wrote:
Running 6.32.2 since that's the latest bugfix load for ARM, and it's
what came loaded on the router.
If I plug into any of ports 6-10, the interface keeps going
up/down/up/down every few seconds. Ports 1-5 no problems. I am
confused, supposedly both switch groups use the same model of switch
chip.
Just to make sure I didn't have a config problem or a bad router, I
took another one out of the box, plugged into port 7, same thing. I
got this with my laptop but I also tried a nanostation I had sitting
here and got the same thing, the laptop is gigabit, the nanostation is
10/100. Also didn't make any difference with my laptop if I forced
one end or the other to 100FDX. Both sides report the link going down.
Has anyone else seen this or seen something on the forums about it?
This seems very ungood. So instead of a 2011 with ports 6-10 limited
to 10/100, I get ports 6-10 unusable.
