I'll try a different type of probe and see if anything changes. Thanks. On Mon, Feb 22, 2016 at 3:23 AM, Adam Moffett <[email protected]> wrote:
> 4.0b3 > > I also am not using a "function" probe type anywhere. I do use the SNMP > probe type extensively. > > > On 2/22/2016 1:52 AM, Jason McKemie wrote: > > Upon searching in the Mikrotik Forums, it looks like this could be an > issue with custom OIDs on the newer versions of the dude. What version are > you using? > > On Sat, Feb 20, 2016 at 8:29 PM, Adam Moffett <[email protected]> wrote: > >> Try >> oid_raw("1.3.6.1.4.1.32050.2.1.27.5.0") >> >> I'm not totally sure what the difference is, other than sometimes that >> one works. >> >> >> >> On 2/20/2016 8:14 PM, Jason McKemie wrote: >> >>> I've just started working with using the Dude for monitoring on the >>> bench, but I'm getting a parse failed on the probe for a test device. I've >>> attached an image showing the function and probe I created. Any ideas what >>> I'm doing wrong? Please note that this is just a test setup using a >>> Ubiquiti AP with no client. I'm aware that the noise floor reading is >>> essentially useless and have no intention of graphing it in a production >>> environment. >>> >>> -Jason >>> >> >> > >
