We're on a couple of smallish ones (140-150' towers, if I remember right), but they're not monopoles, so nothing out of the ordinary for mounting. We haven't run into any particular problems, they do vibrate a bit, but it doesn't seem to be enough to affect anything we have on them.
On Mon, Feb 22, 2016 at 8:45 PM, Adam Moffett <[email protected]> wrote: > Fortunately I only need to install subscriber equipment. > > On 2/22/2016 9:19 PM, Lewis Bergman wrote: > > It is hard to believe but power in a wind farm isn't as available as you > might think. I had to relocate an air-conditioned cabinet to another one > because original location because it only had one leg and I needed 220. I > also needed 9 amps and there was only 4 amps. > > In addition, it was very difficult to figure a way into the tower. We had > to create a junction box both inside and out with a loop through the door. > I expect issues with that. > On Mon, Feb 22, 2016, 7:43 PM Adam Moffett < <[email protected]> > [email protected]> wrote: > >> Magnetic mounts on the *side* of the tower? Or did they have some kind >> of platform up top? >> >> It so happens I have some magnetic mounts from an older water tank >> installation (tank was demo'd). I'm having trouble picturing those on a >> monopole. >> >> What was wrong with the power? Surges when the wind blows hard? >> >> >> On 2/22/2016 8:28 PM, Lewis Bergman wrote: >> >> All the ones I have done absolutely refuse to penetrate the tower. >> Magnetic mounts were the only option. Very complex and power was >> problematic. >> >> On Mon, Feb 22, 2016, 7:20 PM Adam Moffett <[email protected]> wrote: >> >>> Has anybody mounted equipment on a wind turbine tower? Any problems >>> with vibration? Any problems with anything else that you don't find on >>> other towers? >>> >>> >> >
