epmp? 5.1 is 18dbm tx max power, 36 eirp 5.7 is 23dbm tx max power, 36 eirp
I believe... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Feb 23, 2016 at 11:27 AM, Kurt Fankhauser <[email protected]> wrote: > Josh, > > If I remember correctly doesnt the EPMP have some really low legal TX > power on 5150-5250 though? Even though the rules allow for higher EIRP in > that band? I think that was done to make the EPMP pass the strict OOBE > requirements for 5150-5250. I wonder if the 450i is able to run higher > power in that band because of better components? If so that would be worth > the price difference to some... > > On Tue, Feb 23, 2016 at 11:18 AM, Josh Luthman < > [email protected]> wrote: > >> I would expect a purpose built product didn't have a whole lot of OOBE >> problems. Same company also does Atheros radios and they're $100 a piece. >> >> I'd guess the problem is that the hardware they built depends on >> components that don't extend that wide range of frequencies. It's like if >> you made one product versus a million, cost per unit goes way down. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Tue, Feb 23, 2016 at 11:15 AM, Kurt Fankhauser < >> [email protected]> wrote: >> >>> Is that why the 450i SM is so expensive because of the strict OOBE >>> requirements in 5150-5250mhz? >>> >>> On Tue, Feb 23, 2016 at 9:54 AM, Josh Luthman < >>> [email protected]> wrote: >>> >>>> That band is NOT DFS. It is a bit less power than 5.7. The pmp450 SM >>>> is super super super expensive to do 5.1 (today; Matt recently said they're >>>> looking at a solution to this). Epmp does it at the same price as 5.4 or >>>> 5.7. >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Tue, Feb 23, 2016 at 9:47 AM, Craig Schmaderer < >>>> [email protected]> wrote: >>>> >>>>> I know its been talked about a bit, but is this band have no dfs on >>>>> the 450i? I have been told it has similar power ratings as the 5.8ghz >>>>> band? Can anyone give me the right info. I need a new PTP link and need >>>>> to avoid dfs. Also, the PMP 450i running in this band only sm that has >>>>> 5.1ghz is the 450i sm right? Thanks, Craig. >>>>> >>>>> >>>>> >>>>> *Craig R. Schmaderer* >>>>> >>>>> *CEO | Skywave Wireless, Inc.* >>>>> >>>>> *Ph: 402-372-1975 <402-372-1975> | Fax: 402-372-1058 <402-372-1058>* >>>>> >>>>> *Direct: 402-372-1052 <402-372-1052>* >>>>> >>>>> >>>>> >>>> >>>> >>> >> >
