On 2.4.3+? Not for me.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Feb 23, 2016 at 11:49 AM, Mathew Howard <[email protected]> wrote: > The GUI actually let's you do 20dbm Tx power, but the little notification > when you first set them up says the max for UNII-1 is 18dbm... I'm not sure > which is actually correct. > > On Tue, Feb 23, 2016 at 10:44 AM, Josh Luthman < > [email protected]> wrote: > >> GUI let's you. I've been doing it for ages now. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Tue, Feb 23, 2016 at 11:41 AM, Kurt Fankhauser < >> [email protected]> wrote: >> >>> Will the EPMP actually output 36db EIRP in 5150mhz-5250mhz? If so thats >>> news to me. >>> >>> On Tue, Feb 23, 2016 at 11:39 AM, Josh Luthman < >>> [email protected]> wrote: >>> >>>> epmp? >>>> >>>> 5.1 is 18dbm tx max power, 36 eirp >>>> 5.7 is 23dbm tx max power, 36 eirp >>>> >>>> I believe... >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Tue, Feb 23, 2016 at 11:27 AM, Kurt Fankhauser < >>>> [email protected]> wrote: >>>> >>>>> Josh, >>>>> >>>>> If I remember correctly doesnt the EPMP have some really low legal TX >>>>> power on 5150-5250 though? Even though the rules allow for higher EIRP in >>>>> that band? I think that was done to make the EPMP pass the strict OOBE >>>>> requirements for 5150-5250. I wonder if the 450i is able to run higher >>>>> power in that band because of better components? If so that would be worth >>>>> the price difference to some... >>>>> >>>>> On Tue, Feb 23, 2016 at 11:18 AM, Josh Luthman < >>>>> [email protected]> wrote: >>>>> >>>>>> I would expect a purpose built product didn't have a whole lot of >>>>>> OOBE problems. Same company also does Atheros radios and they're $100 a >>>>>> piece. >>>>>> >>>>>> I'd guess the problem is that the hardware they built depends on >>>>>> components that don't extend that wide range of frequencies. It's like >>>>>> if >>>>>> you made one product versus a million, cost per unit goes way down. >>>>>> >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 >>>>>> Direct: 937-552-2343 >>>>>> 1100 Wayne St >>>>>> Suite 1337 >>>>>> Troy, OH 45373 >>>>>> >>>>>> On Tue, Feb 23, 2016 at 11:15 AM, Kurt Fankhauser < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Is that why the 450i SM is so expensive because of the strict OOBE >>>>>>> requirements in 5150-5250mhz? >>>>>>> >>>>>>> On Tue, Feb 23, 2016 at 9:54 AM, Josh Luthman < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> That band is NOT DFS. It is a bit less power than 5.7. The pmp450 >>>>>>>> SM is super super super expensive to do 5.1 (today; Matt recently said >>>>>>>> they're looking at a solution to this). Epmp does it at the same >>>>>>>> price as >>>>>>>> 5.4 or 5.7. >>>>>>>> >>>>>>>> >>>>>>>> Josh Luthman >>>>>>>> Office: 937-552-2340 >>>>>>>> Direct: 937-552-2343 >>>>>>>> 1100 Wayne St >>>>>>>> Suite 1337 >>>>>>>> Troy, OH 45373 >>>>>>>> >>>>>>>> On Tue, Feb 23, 2016 at 9:47 AM, Craig Schmaderer < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> I know its been talked about a bit, but is this band have no dfs >>>>>>>>> on the 450i? I have been told it has similar power ratings as the >>>>>>>>> 5.8ghz >>>>>>>>> band? Can anyone give me the right info. I need a new PTP link and >>>>>>>>> need >>>>>>>>> to avoid dfs. Also, the PMP 450i running in this band only sm that >>>>>>>>> has >>>>>>>>> 5.1ghz is the 450i sm right? Thanks, Craig. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> *Craig R. Schmaderer* >>>>>>>>> >>>>>>>>> *CEO | Skywave Wireless, Inc.* >>>>>>>>> >>>>>>>>> *Ph: 402-372-1975 <402-372-1975> | Fax: 402-372-1058 >>>>>>>>> <402-372-1058>* >>>>>>>>> >>>>>>>>> *Direct: 402-372-1052 <402-372-1052>* >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
