Have you checked to see if there is still an OSPF connection running over this licensed link? As in do you see the neighbor router listed in OSPF for the other side of the link?
On Sun, Feb 28, 2016 at 10:18 AM, Adam Moffett <[email protected]> wrote: > I have a 500mbps licensed microwave path that was up and looking perfectly > fine, but had no traffic on it. > Instead traffic was moving on a 5.8 Radwin to a different site. Everything > was up, but I don't understand this route selection. The path via the > Radwin is longer to lots of places, so OSPF should have used the licensed > path for at least SOME traffic simply based on it being shorter. I also > set the costs on the interfaces on both ends of that Radwin to 150, so it > normally doesn't get used at all. Somehow this morning at 3:15am the > routers decided to use the backup path. Everything returned to normal > after I rebooted one end. > > It may be coincidental (or not), but I know a truck took out a telephone > pole last night which caused an upstream fiber issue, and we had a UPS > battery explode. Is this all coincidence? Sometimes UPS's explode, > sometimes That One Guy Steve burns down a house, sometimes RouterOS rides > the short bus, some things are just outside our control. Or maybe a truck > hit a pole, which caused a power surge that blew up a UPS and made a > Mikrotik fart inside of it's head. I could believe either one. > > In any case. Is there a different RouterOS version that will trust my > opinion when I tell it a path has high cost? Currently running 6.32.3 I > think. It's pretty non-sensical that this happened at all. > > -- Darin Steffl Minnesota WiFi www.mnwifi.com 507-634-WiFi <http://www.facebook.com/minnesotawifi> Like us on Facebook <http://www.facebook.com/minnesotawifi>
