Call me an idiot..... I love these 'educational' threads... but I have to ask....
Do you all start off by reading the Users Guide / Manual that comes with the Airfiber 24, one can download it from the UBNT website as well... It is very concise and pretty clear in the different deployment options.. including what is needed (configuration wise) when putting multiple radios on the same tower... :) Regards. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] > From: "John Woodfield" <[email protected]> > To: [email protected] > Sent: Sunday, March 20, 2016 11:25:14 AM > Subject: Re: [AFMUG] Two Airfiber 40 degrees off > Right. Full duplex doesn't need sync. Didn't realize they would run in HD. No > idea why one would run them in HD mode > Sent from my iPhone > On Mar 20, 2016, at 11:00 AM, Mathew Howard < [email protected] > wrote: >> They can run in half duplex mode. I know the AF24 can only use 100mhz >> channels, >> I'm not sure if that's the case for the AF24HD or not, but I believe it is. >> Also, you don't really need sync with full duplex, as long as the other end >> can't see more than one of them and you keep all of them on the tower on >> either >> the high or the low channel, they should work fine. >> On Sun, Mar 20, 2016 at 9:51 AM, John Woodfield < [email protected] > >> wrote: >>> How if they are full duplex? >>> Sent from my iPhone >>> On Mar 20, 2016, at 10:40 AM, Jeremy < [email protected] > wrote: >>>> These totally really sync. >>>> On Sun, Mar 20, 2016 at 8:39 AM, Kurt Fankhauser < >>>> [email protected] > >>>> wrote: >>>>> Do both the airfiber 24ghz non-HD and HD version use the same channel >>>>> widths? >>>>> Also are there two non overlapping channels in the 24ghz band or do these >>>>> things totally really on sync for putting multiple units on 1 tower? >>>>> On Sat, Mar 19, 2016 at 6:26 PM, Gino Villarini < [email protected] > >>>>> wrote: >>>>>> we have lots with 8-9 deg separation >>>>>> Sent from Outlook Mobile >>>>>> On Sat, Mar 19, 2016 at 3:03 PM -0700, "Jeremy" < [email protected] >>>>>> > >>>>>> wrote: >>>>>>> I have heard people saying that you only need 8 degrees with these. >>>>>>> On Sat, Mar 19, 2016 at 2:59 PM, Eric Kuhnke < [email protected] > >>>>>>> wrote: >>>>>>>> You can do this with the regular AF24 or the AF24HD, just ensure that >>>>>>>> both units >>>>>>>> at the single location are either "high" or "low". >>>>>>>> 40 degrees azimuth only separation, or is there also an elevation >>>>>>>> difference in >>>>>>>> the aim? >>>>>>>> Even 15 degrees azimuth can be enough. >>>>>>>> On Sat, Mar 19, 2016 at 1:56 PM, Sterling Jacobson < >>>>>>>> [email protected] > >>>>>>>> wrote: >>>>>>>>> Can I run two Airfiber 24Ghz units full duplex from one location if >>>>>>>>> they are >>>>>>>>> separated about 40 degrees? >>>>>>>>> Is this a standard feature of sync with GPS on the regular units? Or >>>>>>>>> do I need >>>>>>>>> the 1Gbps HD units?
