You changed channels, it it still the right unit? High vs low? -Ty
-Ty On Thu, Mar 24, 2016 at 1:42 PM, Sterling Jacobson <[email protected]> wrote: > I'm checking, but yet, they should be. > > This link was up and working last year, then it was removed off the > mountain, then this year put back up with one end in a different location > and under a different FCC license. > > So the things that were changed were the tx/rx frequencies (matching send > for both radios on a side and matching receive, just switched on each end) > and dBm now on both sides. > > Physically on one side we 'rotated' the antenna/mount 180 degrees to make > it a right handed mount instead of left handed. > That shouldn't matter, should it? > > I don't have management access available externally, or even able to > connect to the internet at this point in time, or I would. > > I could send screen shots I guess. > > -----Original Message----- > From: Af [mailto:[email protected]] On Behalf Of SmarterBroadband > Sent: Thursday, March 24, 2016 12:36 PM > To: [email protected] > Subject: Re: [AFMUG] Ceragon IP20C > > Are they on the same firmware? > That caused us a problem where they would not link. > > Can you give me remote access? I could take a quick look and compare to > one of my links. > > Adam > > -----Original Message----- > From: Af [mailto:[email protected]] On Behalf Of Sterling Jacobson > Sent: Thursday, March 24, 2016 11:33 AM > To: [email protected] > Subject: Re: [AFMUG] Ceragon IP20C > > Hey guys, I am completely stumped at this point. > > I've tried three times to get this link working, to even show a brief blip > of anything showing up on the other side power wise. > > I have both radios ON and transmitting at full 24dBm. > > I don't see ANYTHING change on the other side of the link. > > This is with 3' dishes and about 8 miles out. > > All settings on both sides are the same except tx/rx frequencies swapped > of course. > > What am I missing? > > Is there some magic on/off switch or feature/function that I am > overlooking on these radios? > > GAAAHHHHH! > > -----Original Message----- > From: Af [mailto:[email protected]] On Behalf Of Sterling Jacobson > Sent: Wednesday, February 24, 2016 2:13 PM > To: '[email protected]' <[email protected]> > Subject: [AFMUG] Ceragon IP20C > > Anyone around today that has configured and aimed these before? > > I'm in the web page under Radio Parameters and I'm confused about the TX > Mute. > > Should that be ON to allow the radios to talk? Or OFF? > > And I'm unsure on XPIC, I think I have it so it should work, but I only > have a pair of frequencies, but two actual radios per side of this link. > >
