There's already one of these on the roadmap. Unit which will sync two radios. On Mar 27, 2016 11:37 AM, "George Skorup" <[email protected]> wrote:
> Woulda been nice. Oh well. > > This I think is another good example for a UGPS-like SyncPipe. Could I > send a climber up to take the Parasitic pipe out and then throw on a > SyncInjector at the bottom... sure. Burning a GigE SyncInjector for a 1 AP > site though. > > On 3/26/2016 6:42 PM, Forrest Christian (List Account) wrote: > > I wouldn't recommend this. Mainly because it's going to unbalance the > gigabit ethernet pairs and likely cause ethernet errors as the power > consumption changes. > On Mar 26, 2016 7:15 AM, "George Skorup" <[email protected]> wrote: > >> Dumb question, probably best answered by Forrest. Say I have one of the >> newer universal Parasitic SyncPipes. Newer meaning Rev G+. Universal >> meaning you can use them on standard Canopy 30VDC POE and the stupid >> 320/430 pinout, since they tap only the two power pins that don't change. >> OK, so now say I take a GigE injector and configure a 450 AP to negotiate >> 1000BaseT. Will GigE work... "through" the Parasitic pipe? I know the >> 10/100 data pairs are passed straight through. Not sure about the other two >> pairs. Since it taps only two pins for power, I doubt there's any bonding >> going on. >> > >
