If thats the case then why not a ptp650 with a 20Mhz full key which will
allow aprox 250Mbs at 20Mbs at less than 3ms latency
I have one with chucks 2' optic dishes at 9mile apart tower to tower in
a 5G noisy environment workin with no issue.
Recently installed the fiber modules to over come some cable noise due
to a 5Kw radio station on same tower.
We are maxed at 250Mb though and now purchasing the full key to open the
radio up to allow a 30Mhz wide channel for some additional capacity
while we get a new licensed link to offload traffic to a much larger
capacity site we have.
FYI love those optic dishes ;)
I know price point might be an issue but consider we just put that 650
in less than 2yrs and already maxed it. Thank you cambium for fat
Capacity Access points
We just thought the 450 was hungry for bandwidth get your hands on some
450i.... OMG... stop the netflix or what ever video crud is out there
sheesh..
On 4/19/2016 5:40 PM, Sam Lambie wrote:
Ok,
Are speeds vs channel sizes linear?
If the Mimosa B5 says it does 500mbps one way at 80mhz, does that mean
that at 40mhz it's 250mbps and at 20mhz it is 125mbps?
Is there a handy chart or formula that I should be studying?
Thanks
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>
--
