"Recently installed the fiber modules to over come some cable noise due to a 5Kw radio station on same tower."
Oh? You can do that on AF5x? ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Josh Reynolds" <[email protected]> To: [email protected] Sent: Tuesday, April 19, 2016 10:02:56 PM Subject: Re: [AFMUG] Mimosa B5 speeds at other channel sizes. You can do the same thing with an AF5X... On Apr 19, 2016 9:54 PM, "David Milholen" < [email protected] > wrote: If thats the case then why not a ptp650 with a 20Mhz full key which will allow aprox 250Mbs at 20Mbs at less than 3ms latency I have one with chucks 2' optic dishes at 9mile apart tower to tower in a 5G noisy environment workin with no issue. Recently installed the fiber modules to over come some cable noise due to a 5Kw radio station on same tower. We are maxed at 250Mb though and now purchasing the full key to open the radio up to allow a 30Mhz wide channel for some additional capacity while we get a new licensed link to offload traffic to a much larger capacity site we have. FYI love those optic dishes ;) I know price point might be an issue but consider we just put that 650 in less than 2yrs and already maxed it. Thank you cambium for fat Capacity Access points We just thought the 450 was hungry for bandwidth get your hands on some 450i.... OMG... stop the netflix or what ever video crud is out there sheesh.. On 4/19/2016 5:40 PM, Sam Lambie wrote: <blockquote> Ok, Are speeds vs channel sizes linear? If the Mimosa B5 says it does 500mbps one way at 80mhz, does that mean that at 40mhz it's 250mbps and at 20mhz it is 125mbps? Is there a handy chart or formula that I should be studying? Thanks -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com -- </blockquote>
