keystone is keystone, no? it's an open standard. all same dimension to click into the faceplate.
more detailed dimensions here, for example, http://www.delock.de/infothek/Kataloge_Flyer/EN137708_213.pdf On Fri, May 20, 2016 at 4:11 PM, That One Guy /sarcasm < [email protected]> wrote: > without buying one to physically check would there be a way to know if our > leviton keystones fit that > > On Fri, May 20, 2016 at 5:49 PM, Eric Kuhnke <[email protected]> > wrote: > >> If it has to be under $200 or near it with no holes, you drill them out >> yourself and install glands/conduit, this: >> >> >> http://www.l-com.com/nema-enclosures-18x16x8-inch-weatherproof-nema-enclosure-with-mounting-plate >> >> consider doing it as two surface mounted 12-port keystone patch panels on >> the aluminum backplate, rather than a 1U 24-port patch panel. >> >> such as, >> http://www.showmecables.com/product/Keystone-Blank-Patch-Panel-High-Density-Style-12-Port.aspx >> >> >> >> >> >> On Fri, May 20, 2016 at 3:38 PM, That One Guy /sarcasm < >> [email protected]> wrote: >> >>> I need a small enclosure to house a 1u 24 port patch panel (we normally >>> sick 3U minimum in a box) >>> this will need to allow for up to 48 cable entries if the whole thing >>> were populated. This is for the top of a grain elevator (will use the same >>> set up elsewhere) >>> >>> We bring BBDGE up to it and terminate to the panel, then as we add >>> radios we just add the tail, we will bond the copper shields in here too. >>> We do individual 1/2 inch knockout entries. >>> >>> It just needs to stand up in wind and sun, we will put all the holes in >>> it. I do meed to keep the weight down because it will probably end up >>> mounted to the site 1 1/2 inch conduit >>> >>> Im looking for inexpensive (sub 200$) no removable gaskets for techs to >>> drop part numbers. I know all the vendors websites, Im looking for >>> something somebody else has used. It doesnt even have to be this same >>> design, just a cross connect box that we can change the top end tails >>> easily. need part numbers here >>> >>> >>> >>> -- >>> If you only see yourself as part of the team but you don't see your team >>> as part of yourself you have already failed as part of the team. >>> >> >> > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. >
