Yep. I have no problem running PMP100/450 and ePMP on AD-155B's set to
float at 27.6V at small and medium-ish sites.
If you're just looking for AC-DC, then the SDR-120-24 is fine with the
adjustment pot cranked up to 29.5. In my environment though, since I try
to keep everything on the same rail and use as few DC-DC converters as
possible, say a MikroTik switch/router that takes a max of 28VDC, 29.5
is a bad idea. And probably not a good idea for an UBNT radio either,
like a RocketM5 on a shorter run.
On 5/25/2016 11:22 AM, Josh Luthman wrote:
I've been using these and batteries and have been happy:
ACDC battery charger
* Meanwell AD-155B
<https://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2146118_-1>
* Meanwell DRL-02
<https://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_222131_-1>
* Meanwell DRP-03
<https://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_222173_-1>
* Three M3x6 screws and two M4x6 screws
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, May 25, 2016 at 12:20 PM, Josh Baird <[email protected]
<mailto:[email protected]>> wrote:
Nearly all 24VDC power supplies will crank up to 29-30V. This is
very common.
On Wed, May 25, 2016 at 12:04 PM, Sam Lambie <[email protected]
<mailto:[email protected]>> wrote:
Hey all,
I am looking for a Power supply (AC-DC) to Power Cambiums
100-450 gear. It's easy to find 24vdc but the 30vdc is elusive?
I have been using the Meanwell SDR-24vdc and cranking them up
to 28 vdc but I would rather do it right. Anyone have sources
for such Power Supplies?
thanks
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 <tel:575-758-7598> Office
www.Taosnet.com <http://www.newmex.com>
