Yep, we just run everything at 27-28v, pretty much everything is happy that way.
On Wed, May 25, 2016 at 12:09 PM, George Skorup <[email protected]> wrote: > Yep. I have no problem running PMP100/450 and ePMP on AD-155B's set to > float at 27.6V at small and medium-ish sites. > > If you're just looking for AC-DC, then the SDR-120-24 is fine with the > adjustment pot cranked up to 29.5. In my environment though, since I try to > keep everything on the same rail and use as few DC-DC converters as > possible, say a MikroTik switch/router that takes a max of 28VDC, 29.5 is a > bad idea. And probably not a good idea for an UBNT radio either, like a > RocketM5 on a shorter run. > > On 5/25/2016 11:22 AM, Josh Luthman wrote: > > I've been using these and batteries and have been happy: > > ACDC battery charger > > - Meanwell AD-155B > > <https://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2146118_-1> > - Meanwell DRL-02 > > <https://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_222131_-1> > - Meanwell DRP-03 > > <https://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_222173_-1> > - Three M3x6 screws and two M4x6 screws > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Wed, May 25, 2016 at 12:20 PM, Josh Baird <[email protected]> wrote: > >> Nearly all 24VDC power supplies will crank up to 29-30V. This is very >> common. >> >> On Wed, May 25, 2016 at 12:04 PM, Sam Lambie < <[email protected]> >> [email protected]> wrote: >> >>> Hey all, >>> >>> I am looking for a Power supply (AC-DC) to Power Cambiums 100-450 gear. >>> It's easy to find 24vdc but the 30vdc is elusive? >>> I have been using the Meanwell SDR-24vdc and cranking them up to 28 vdc >>> but I would rather do it right. Anyone have sources for such Power Supplies? >>> >>> thanks >>> Sam >>> >>> -- >>> -- >>> *Sam Lambie* >>> Taosnet Wireless Tech. >>> 575-758-7598 Office >>> www.Taosnet.com <http://www.newmex.com> >>> >> >> > >
