I was joking with someone that for 900MHz the panel would be the size of the 6ft long table I was sitting at. Haven’t done the math, but I don’t think I’m that far off :-S
Daniel White Managing Director – Hardware Distribution Sales ConVergence Technologies Cell: +1 (303) 746-3590 <mailto:[email protected]> [email protected] From: Af [mailto:[email protected]] On Behalf Of Kurt Fankhauser Sent: Thursday, June 23, 2016 6:21 AM To: [email protected] Subject: Re: [AFMUG] 450m Actually i was just thinking, Do you think that medusa could be done in 900mhz? With the better interference rejection due to the beam steering and usually the 900mhz customers are spread out everywhere this might be a godsend for 900. Only wonder how big the sector antenna will be..... On Wed, Jun 22, 2016 at 11:04 PM, Forrest Christian (List Account) <[email protected] <mailto:[email protected]> > wrote: That is why they said 'about 3-4 times the throughput'. The better the spacial diversity the better the throughput - they can get 7x if everything is aligned correctly. You also need to remember that these aren't fixed beams - they're dynamically pointable, and my understanding is that it can be re-pointed in each timeslot, so as long as all of your customers aren't in a very narrow slice, and are relatively spread out, you should gain something. The other thought is that this is going to encourage people to move to as wide of sector as possible to improve the beamsteering performance. On Wed, Jun 22, 2016 at 11:33 AM, Kurt Fankhauser <[email protected] <mailto:[email protected]> > wrote: So if i have a tower like the one below with customers spaced out accordingly, alot of the customers are going to fall wthin 1 or 2 of the 6 degree "strip patches" on the antenna and thus i wont see as much throughput increase per AP? :( On Wed, Jun 22, 2016 at 1:28 PM, Bill Prince <[email protected] <mailto:[email protected]> > wrote: You can't do that kind of spatial diversity in a PTP link. bp <part15sbs{at}gmail{dot}com> On 6/22/2016 10:11 AM, Kurt Fankhauser wrote: Will there be a PTP version of Medusa that can triple the throughput of existing PTP650 links on the same channel width? I am wondering why the same massive-mimo can't be applied to PTP so a 450mbps PTP650 link running on 45mhz channel can then achieve 1.35Gbps on the same 45mhz channel? On Wed, Jun 22, 2016 at 1:05 PM, Josh Luthman <[email protected] <mailto:[email protected]> > wrote: Are these uplink and downlink? The epmp 2000 is only uplink. Josh Luthman Office: 937-552-2340 <tel:937-552-2340> Direct: 937-552-2343 <tel:937-552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Jun 22, 2016 12:54 PM, "Peter Kranz" <[email protected] <mailto:[email protected]> > wrote: With the ETI beamformer antenna.. you get ~20db gain since you have the electrical capture of all the active antennas going on.. in theory creating a high gain very narrow spot beam of 15 degrees or so.. 14 implies something else.. Peter Kranz www.UnwiredLtd.com <http://www.UnwiredLtd.com> Desk: 510-868-1614 x100 <tel:510-868-1614%20x100> Mobile: 510-207-0000 <tel:510-207-0000> <mailto:[email protected]> [email protected] From: Af [mailto:[email protected] <mailto:[email protected]> ] On Behalf Of Bill Prince Sent: Wednesday, June 22, 2016 9:51 AM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] 450m They beam-form the power coming in. bp <part15sbs{at}gmail{dot}com> On 6/22/2016 9:40 AM, Craig Schmaderer wrote: Over poe though? That’s pushing a lot of watts over it, I didn’t hear them say it had a separate power port? From: Af [mailto:[email protected]] On Behalf Of Josh Reynolds Sent: Wednesday, June 22, 2016 11:40 AM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] 450m 48v to 56 or 59v I believe On Wed, Jun 22, 2016 at 11:38 AM, Craig Schmaderer <[email protected] <mailto:[email protected]> > wrote: Spec sheet says 70watts, how are we going to power this thing, they never said the power options did they? From: Af [mailto:[email protected] <mailto:[email protected]> ] On Behalf Of Daniel White Sent: Wednesday, June 22, 2016 11:37 AM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] 450m Yes there is a GigE roadmap that includes 40MHz channels. Daniel White Managing Director – Hardware Distribution Sales ConVergence Technologies Cell: +1 (303) 746-3590 <tel:%2B1%20%28303%29%20746-3590> [email protected] <mailto:[email protected]> From: Af [mailto:[email protected]] On Behalf Of Kurt Fankhauser Sent: Wednesday, June 22, 2016 10:30 AM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] 450m Any plans to offer 40mhz channel on this thing for 800-1000mbps throughput? On Wed, Jun 22, 2016 at 12:22 PM, Mike Hammett <[email protected] <mailto:[email protected]> > wrote: That does a lot of nothing now. ----- Mike Hammett Intelligent Computing Solutions <http://www.ics-il.com/> <https://www.facebook.com/ICSIL> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> <https://www.linkedin.com/company/intelligent-computing-solutions> <https://twitter.com/ICSIL> Midwest Internet Exchange <http://www.midwest-ix.com/> <https://www.facebook.com/mdwestix> <https://www.linkedin.com/company/midwest-internet-exchange> <https://twitter.com/mdwestix> The Brothers WISP <http://www.thebrotherswisp.com/> <https://www.facebook.com/thebrotherswisp> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> _____ From: "Bill Prince" <[email protected] <mailto:[email protected]> > To: [email protected] <mailto:[email protected]> Sent: Wednesday, June 22, 2016 11:21:33 AM Subject: Re: [AFMUG] 450m Take whatever you like from here: https://www.youtube.com/watch?v=YO9JfpcaZRA bp <part15sbs{at}gmail{dot}com> On 6/22/2016 9:17 AM, Matt wrote: There is a webinar going on now as we speak introducing the product. Is there anywhere to download slides or video from the webinar? <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon> Virus-free. www.avast.com <http://www.avast.com> -- Forrest Christian CEO, PacketFlux Technologies, Inc. Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 <mailto:[email protected]> [email protected] | <http://www.packetflux.com/> http://www.packetflux.com <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> <http://ws-stats.appspot.com/t/pixel.png?e=setup_page_outlook_compose> <http://ws-stats.appspot.com/t/pixel.png?e=setup_page_outlook_active&uid=e965778f9a351fad7a8a860dffc144ce> <http://ws-stats.appspot.com/t/pixel.png?e=setup_page_outlook_active&uid=e965778f9a351fad7a8a860dffc144ce> --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
