Hey... I was attempting lame humor On Aug 15, 2016 3:55 PM, "Ken Hohhof" <[email protected]> wrote:
> I think he might have been pointing out that if your installer didn’t know > about the 2 degree downtilt, it could have been installed with too much > downtilt which would adversely affect performance comparisons. > > Also look at the elevation plots for the 2 products, the Cambium sector is > shown as having quite a bit of null fill. > > Electrical downtilt could also be more consistent at the edges of the > sector than mechanical downtilt. > > RF Elements in their literature touts matching VPOL and HPOL patterns, > obviously good for MIMO-B performance. Those of us who have tried dual pol > omnis know the downside of mismatched VPOL and HPOL antenna gain. > > > *From:* Jaime Solorza <[email protected]> > *Sent:* Monday, August 15, 2016 4:43 PM > *To:* Animal Farm <[email protected]> > *Subject:* Re: [AFMUG] RF Elements vs. Cambium sectors > > > Use a washer... Zaz 2 degree downtilt. Lol > > On Aug 15, 2016 3:25 PM, "Faisal Imtiaz" <[email protected]> wrote: > > Sitting back and just comparing the specs, I can believe the results. > Both are excellent sectors, but if you do a line by line spec comparison > you will see that RF Elements eeks out by a notch. > > The only thing to keep in mind is that Cambium is showing 2degree > electrical down-tilt, and Rf Element does not have that. > > > Regards. > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > > Help-desk: (305)663-5518 Option 2 or Email: [email protected] > > ------------------------------ > > *From: *"Paul McCall" <[email protected]> > *To: *[email protected] > *Sent: *Monday, August 15, 2016 2:16:34 PM > *Subject: *[AFMUG] RF Elements vs. Cambium sectors > > I saw an interesting set of test results or someone testing an ePMP 1000 > with RF Elements 17 db sector vs. Cambium ePMP 2000 with Cambium 2000 > sector, and the performance was actually better with RF elements. Yet, > Cambium’s new sector claims 35dB F/B vs. 29dB for RF Elements. > > > > Anybody using RF Elements sector with ePMP 1000 radios and getting good > results on F/B GPS Sync issues? I know with the 1000 series, we needed 8 > to 15 feet of vertical separation to make everything run smooth on > Frequency re-use. It will “work” with less. > > > > Anyway, curious if that will be a problem with RF Elements in the same > environment. I see RF elements has some bigger gain sectors as well. > > > > Paul McCall, President > > PDMNet, Inc. / Florida Broadband, Inc. > > 658 Old Dixie Highway > > Vero Beach, FL 32962 > > 772-564-6800 > > [email protected] > > www.pdmnet.com > > www.floridabroadband.com > > > > > > >
