Eh, $400 on eBay or $500 for the Ubiquiti edgeswitch 16 port. Will have to look at these G8124s, as I've never come across them before.
On Sep 14, 2016 10:02 AM, "Joe Novak" <[email protected]> wrote: > Good to know.. these G8124s look like perfect 10gb switches for home.. > quite reasonably priced too! > > > Let us know if the 3rd party fix works TJ. > > > Joe > > > On Wed, Sep 14, 2016 at 9:42 AM, Gerard Dupont III <[email protected]> > wrote: > >> Faisal sent me this a while back for those. Works on the G8264 also. >> >> ===================== >> For 3rd party SFP's to work in IBM switches >> >> To set/reset SFP override, from the console port, start a reload of >> the switch, when it says memory test and starts putting periods up on >> the display, press the "shift-m" key combination several times, and it >> will boot into a "=>" prompt >> At the "=>" prompt enter the following (note the "O" in "Override" is >> case sensitive): >> ==================== >> setenv sfp Override >> saveenv <<< This is necessary to save the setting to NVRAM to survive a >> PoR >> printenv <<< this is to check to make sure the variable is set >> boot >> ================================== >> >> On Wednesday, September 14, 2016, TJ Trout <[email protected]> wrote: >> >>> Anyone have experience with sfp compatibility? >>> >>> I just stupidly ordered a bunch of transceivers from fiberstore before >>> doing research and now I'm seeing that some models are vendor locked 😂 >>> >> >
